Instruction Manual Model XTR2CK To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS® Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www.getxact.com.
KEEPMOVING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAFETY PRECAUTIONS Warning Follow these notifications to avoid any traffic accidents or personal injury: 1. Installation must be performed according to this user guide. 2. Do not install the device where it may obstruct your view through the windshield or of your vehicle’s indicator displays. 3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident. 4.
TABLE OF CONTENTS Introduction Product Overview Package Contents Components Guide Xact Stream | jockey II SIRIUS® Radio Wireless Remote Control Getting Started Mounting Your Xact Stream | jockey II Satellite Radio at Home Mounting Your Xact Stream | jockey II Satellite Radio in a Vehicle Activating Your SIRIUS® Subscription Basic Operations Tuning to Different Entertainment Categories Searching for Music Searching For Music By Channel Searching For Music By Artist/Composer Searching For Music By Song Direct
TABLE OF CONTENTS Daylight Saving Time Alarm Clock Time Program Alert Program Day/Time Channel Selection Auto Shutdown Sleep Mode Factory Default Display Messages Problem Solving Warranty Page Page Page Page Page Page Page Page Page Page Page Page 2 28 28 28 29 29 30 30 31 31 33 35 36
INTRODUCTION Product Overview Thank you for purchasing this product! Your new plug and play XACT Stream | jockey II satellite radio is specifically designed to mount in a vehicle or indoor/outdoor location. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.
COMPONENTS GUIDE XACT Stream | jockey II SIRIUS® Radio 6 1 12 14 7 2 8 3 4 9 13 5 10 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
COMPONENTS GUIDE Wireless Remote Control The wireless remote control packed with your plug and play XACT Stream | jockey II satellite radio mirrors the operations of your plug and play XACT Stream | jockey II satellite radio receiver from a remote location. 7 1 8 9 2 10 3 4 11 5 12 6 1. 2. 3. 4. 5. 6. 7. 13 CH (Channel) (Ascend/Descend Buttons) MUTE BAND DISP (Display) P-TUNE MEMO Power Button 8. 9. 10. 11. 12. 13.
GETTING STARTED Mounting Your XACT Stream | jockey II Satellite Radio at Home Find an appropriate location near your stereo receiver to install your plug and play satellite radio receiver. Mounting Your XACT Stream | jockey II Satellite Radio in a Vehicle Find an accessible location in your vehicle to install your plug and play satellite radio receiver; usually, this is the dashboard.
Activating Your SIRIUS® Subscription Before beginning to use your new device, you must first register to the SIRIUS® Satellite Radio service. Enter Channel Unsubscribed Channel 0123456789 ® There are two ways to activate the SIRIUS Satellite Radio Service: 1. Visit sirius.com and click activate, then follow the on-screen instructions. 2. Call SIRIUS® at 1-866-845-7474. A representative will help you activate your SIRIUS® Satellite Radio Service.
USING THE VEHICLE KIT INSTALLATION NOTE! Use only the appropriate accessories or input devices with your receiver. Use only the 12v Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result in damaging your equipment and void the warranty. 2. 1. ATTACH RECEIVER TO SUCTION MOUNT ATTACH CLIP MOUNT TO RECEIVER 6. 4. 3. 5.
IF YOU HAVE PURCHASED A Boom Box KIT INSTALLATION 1. PUSH RECEIVER ONTO CONNECTOR 3. 2.
BASIC OPERATIONS After your SIRIUS® subscription is activated, the Normal (default) Operation screen will pop up. Channel name 3-digit Channel number song title signal strength indicator 003 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name Category 12:00P A artist’s name Artist Song category name band or preset bank number clock Tuning to Different Entertainment Categories 1. Press the CAT button to scroll through music and entertainment categories.
Searching Music Your satellite radio offers you three ways to seek and select music: by the channel name, by artist/composer and by song title. Searching For Music By Channel (Channel List) 1. Press and hold the button while in Normal Operation mode. The Channel list screen will be displayed, numerically indicating all available channels, regardless of music category. 001 002 003 004 005 006 2. Press the or the setting.
Searching For Music By Song (Song Title List) 1. Press and hold the button while in Normal Operation mode. 2. Continue pressing the button twice. The Song Title list screen will be displayed, indicating all currently playing songs, regardless of category. The song title data is listed in ascending order. 001 002 003 004 005 006 3. Press the or the setting. Song Song Song Song Song Song Title Title Title Title Title Title button continuously to choose a preferred song and press the 4.
Presetting Channels Your XACT Stream | jockey II satellite radio allows you to preset 18 channels. This design enables you to directly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each band contains 3 specific channels (indicated as A-1, A-2, A-3....F-1, F-2 and F-3). 1. Press the 2. Press the or button to search for channels. button to switch to your desired bands (A-F) according to your preference.
Searching for a Preset Channel/Artist/Song 1. Press and hold the button while in Normal Operation mode. The screen will switch between the Normal Operation mode and the Preset Tuning mode. 2. Press and hold the 3. Press the button until the Preset Channel list pops up. button continuously until the preferred Preset Channel list is indicated. 4. Each time you press the to ”Song Title” cyclically. 5.
S-Seek Function_MEMO (Memory Search) Button When in this mode, you can activate the memory search function. This will instruct your satellite radio to search the current incoming SIRIUS® signal and alert you when a song you have saved is being played. s Memory 1/10 Artist Song To Store the Information Under the Normal Operation mode or the Preset Tuning mode, press the data information is recorded in memory and the capacity status is displayed. 001 001 Channel Name Artist Stored Song button.
What If the Program Storage is Full? If the Program Storage is full, a “Memory Full” message will pop up on the screen for a moment, followed by a “Replace” or “Cancel” message. 1. Under Normal Operation mode or in Preset Tuning mode, press the 001 Channel Name Memory Full Artist Memory Full Song Category 12:00P 2. Press the or 3. Press the button. Replace Cancel A Category 12:00P button to select either “Replace” or “Cancel”. button to confirm the setting.
Performing the S-Seek Function Whenever you turn your satellite radio on, it automatically searches the incoming signal to determine if a match exits between the signal and the artist/composers or song titles that you have recorded in memory (except when S-Seek is set to Off). 1. Press and hold the button. The recorded programs lists is displayed. 2. Press and release the button while in S-Seek mode. 3. Two selectable options displayed on the screen. 4.
MENU OPTIONS SETTINGS The following options are included on the Menu Options list: • SIRIUS® ID • Audio Level • Display Settings • Antenna Aiming • FM Transmitter • Memory Options • Channel Add/Skip • Time Features • Lock Options • Factory Default BASIC SETTING PROCEDURE 1. Press the 2. Press the 3. Press the button. The Menu Options list is displayed on the screen. or button to select a desired item button, and the selected Option Setting pops up. 4.
Display Settings Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: • Brightness Control • Contrast Control Brightness Control: A 10-segment horizontal bar graph is displayed. Move the button to adjust the dimming control function accordingly. By pressing the or action, you will return to the Menu Operations list.
FM Transmitter Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: • Frequency • FM On/Off FM Transmitter Frequency FM On/Off Category 12:00P Frequency: enables you to select any one of the pre-programmed FM channels. Press the or button to select a desired channel, then press the button to confirm the setting. To exit this function, press or button. Frequency 88.1 MHz 88.3 MHz 88.5 MHz 88.7 MHz 88.
Channel Add/Skip You can add or skip new/unwanted channels while tuning. When you enter this option, a channel list is displayed, and the current channel playing will be highlighted.
Lock Options Lock/Unlock Edit Code Category 12:00P Lock/Unlock: When using Lock/Unlock for the first time, you are asked to type in the 4-digit code that is used to Lock/Unlock the channel access. Press the “0” button four times to enter the default Access Code: 0000 Enter Code # ____ 0123456789 Thereafter, each time you enter this mode, a channel list will be displayed and the currently playing channel will be highlighted.
New Code # ____ 0123456789 2. Enter the numbers for your new access code by using the The confirmation screen will then be displayed. or 3. Enter the numbers for your new access code again by using Your new access password is now modified. left/right directional buttons. or left/right directional buttons. Confirm Code Code Saved 0123456789 Audio Level Your plug and play satellite radio enables you to adjust audio level.
Antenna Aiming Note: This adjustment setting is required only when you use your device at home. This way, you can assure optimum reception when mounting your SIRIUS® antenna. Menu Options FM Transmitter Channel Add/Skip Lock Options Audio Level Antenna Aiming Upon entering this option, two 10-segment horizontal bar graphs are displayed with a (-) sign to the left and a (+) sign to the right. One is labeled “SAT” (satellite signal) and the other “TER” (terrestrial signal strength).
Memory Options In this mode, you can activate or deactivate the Memory Search Function (S-Seek). You can also remove all of the 18 memory locations. Menu Options Channel Add/Skip Lock Options Audio Level Antenna Aimging Memory Options The following adjustments can be made: • Auto Memory Search • Clear All Memory Options Auto Memory Search Clear All Category 12:00P Auto Memory Search: Press the implement the setting.
Clear All: Press the or button to select either “Yes” or “No”. The message “Are You Sure?” will pop up on the screen. Press the Yes: will REMOVE all recorded channels. No: will CANCEL the deletion.
Clock: This option enables you to set up the time to be displayed on the screen. Time is kept directly by the SIRIUS® satellite and is transmitted in GMT FORMAT. Clock Format Time Zone Daylight Saving Time Format: Press the or button to select either the “12 Hour” (default) or the “24 Hour” mode, then press the button to confirm the setting. Format 12 Hour 24 Hour Category 12:00P Time Zone: Press the to confirm the setting.
Daylight Saving Time (DST): Activate this option if your area is subject to DST. Press the or button to select “DST Observed” (default) or “DST Not Observed” setting. Then press the button to confirm the setting. DST Observed DST Observed DST Not Observed Category 12:00P Alarm Clock: You can set your plug and play satellite radio to turn on at a selected time. Set Alarm: Press the or button to select either the “On” or “Off”(default) setting, then press the button to confirm the setting.
Program Alert: This option allows your XACT Stream | jockey II plug and play satellite radio to tune itself to a pre-selected channel at a pre-selected time. Note: To use your programmed setting, make sure to set “Program Alert” to “Program Alert On”.
Day: Press the or or Sunday. Press the to navigate the day: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Daily button to confirm the setting. Day Monday Tuesday Wednesday Thursday Friday Channel Selection: Press the or button to scroll through the channel list and select the channel of your preference. Press the button to confirm the setting. 001 002 003 004 005 006 Program Alert: Press the the setting.
Sleep Mode: When entering this mode, you can program your XACT Stream | jockey II satellite radio to shutdown after a pre-selected period of time. Sleep Mode Off 15 min 30 min 45 min 60 min The following adjustments can be made: Off (default) 15 min. 30 min. 45 min. 60 min. Press the or button to select the time. Press the button to confirm the setting. Your XACT Stream | jockey II satellite radio receiver will now turn off after the selected time has passed.
Items revert to their original factory settings as follows: All Presets revert to empty Display Dimming to 70% Display Contrast to 50% FM Transmitter to “On” Audio Output Level to 70% Access to all skipped streams restored Memory Search On Memory locations will be erased 12-Hour Clock Format Eastern time zone Daylight savings time observed Alarm Off Alarm Time 12:00pm Program Alert Time 12:00pm Program Alert Day Monday Program Alert Channel Number (current) Auto Shutdown Off Sleep Mode Off Default Font Size
DISPLAY MESSAGES Acquiring Signal When the audio signal is lost, a pop-up window with the message “Acquiring Signal” is displayed until the signal is recovered. 001 Channel Name Acquring Signal Category A Antenna Not Detected When no antenna is detected and the signal is lost, a pop-up window with the message “Antenna Not Detected” is displayed until an antenna is detected and the signal is acquired.
Subscription Updated When a subscription update (PSV) from the SIRIUS® broadcast system is detected, a pop-up window with the message “Subscription Updated Anykey to Continue” is displayed for at least 3 seconds. 001 Channel Name Artist SubscriptionUpdated Anykey to Continue Song Category 12:00P A Mute A single press of the “Mute” button will temporarily disable all analog and digital outputs from your device. Use your remote control to implement this operation.
PROBLEM SOLVING Problem Solving Section For your assistance, we have listed a few common problems below. The Satellite Receiver does not work. Please check the Power Cables. Make sure you have contacted SIRIUS® to activate your Satellite Radio subscription 1-888-539-SIRIUS (7474). I have no sound from my Satellite Receiver. Check the audio cables and make sure they are plugged in correctly. Check the FM Transmitter Setting and make sure that your FM radio is set to the correct channel.
WARRANTY Warranty Information XACT Communication One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. There are no other expressed or implied warranties from XACT Communication. Warranty Service Provided If you purchased the product new from a retail vendor, XACT Communication warrants the equipment against defects in material and workmanship for a period of one (1) year from the original date of purchase.
WARRANTY What To Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow a minimum of 2-3 weeks for the return of your product. For the shipping address of the authorized service center, call one of the telephone numbers given below.
NOTES
NOTES
To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS® Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474). Call Toll Free 1-866-466-XACT (9228) or Visit our Website: www.getxact.
