Sanyo Fisher Co. 21605 Plummer St. Chatsworth, CA 91311 www.sanyo.com SIRIUS Satellite Radio 1221 Avenue of the Americas New York, NY 10020 (888) 539-7474 www.sirius.com © 2004 SIRIUS Satellite Radio Inc.
CONGRATULATIONS! Box Contents Your new Sanyo™ CRSR-10 portable Plug-n-Play receiver lets you enjoy SIRIUS® Satellite Radio’s digital entertainment in your car, home, office, or boat. You may also purchase the Sanyo BMBX-10 Portable Boombox for an enhanced listening experience. Use this manual to familiarize yourself with all of CRSR-10’s features and capabilities. For the latest information about this and other Sanyo products, visit www.sanyo.
Safety Precautions Warning Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this user guide. Sanyo is not responsible for issues arising from installations not performed according to the procedures in this manual. • Do not install the unit where it may obstruct your view through the windshield or of your vehicle’s indicator displays.
Cleaning the Unit If the unit becomes dirty, turn its power off and wipe it clean with a soft dry cloth. Do not use hard cloths or paint thinner, alcohol, or other volatile solvents to clean the unit. These may cause damage or remove indicator characters. Warning Do not operate the unit in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.
8. Temporarily plug the cigarette lighter adapter into the cigarette lighter. 9. Hook the CRSR-10 onto the mounting slot of the Suction Cup mount. Press and hold the POWER button to turn the CRSR-10 on. Running the Car Antenna Cable Before routing the antenna cable, confirm that the antenna is mounted in a good location. 1. Turn the CRSR-10’s power off; unplug the cigarette lighter adapter from the CRSR-10 and the cigarette lighter; unplug the antenna from the CRSR-10. 2.
Sanyo Controls and Features 1 5 6 1. Power Button : Pressing and releasing turns the CRSR-10 On and Off. 2. CHANNEL Button: Navigates through display screens and channels. Pressing the right button increases or moves down in the menus. Pressing the left button decreases or moves up in the menus. 3 4 8 9 2 10 3. SELECT Button: Selects of items highlighted on the display in the Category List Screens, Channel List Screens, and Menu List Screens.
Activating your SIRIUS Subscription Before you can listen to the CRSR-10, you must subscribe to SIRIUS Satellite Radio’s service. 1. Make sure that the CRSR-10 is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal (See installation section on pages 6 - 9 for details). You will not be able to tune to any other channels until you activate your SIRIUS subscription. 4. Press the MENU button to enter the “Menu Options” mode.
Search Modes (Category, Channel, Artist, Song) Direct Tuning 3. Press and release the SELECT Button to select the channel. To exit this mode without changing to a new channel, press and hold the DISP button for 2seconds. The CRSR-10 has four ways to search for and select music: by category, by channel, by artist, and by song title. Searching Categories If you want to listen to a different entertainment category, push the CAT. button up or down to activate the Category Select Screen (top right): 1.
Setting Channel Presets Searching for a Channel Preset (P.TUNE Mode) Preset Tuning List Mode You can store up to 20 of your favorite channels as presets, for quick access. Presets are stored in 2 banks, A and B, each containing 10 channel presets. 1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default Screen. 2. Select the channel you want to preset (see Basic Operation and Changing Channels on page 12). 3.
Memory (MEMO) and Song Seek (S-SEEK) Functions This feature allows you to capture and store the current Artist & Song title with a total of 10 listings (10 Artist/Song Title combinations). The unit also has the capability to search the current incoming SIRIUS signal and alert you when a saved song is being played. Storing Song Titles 1. While the CRSR-10 is in the Default display mode, momentarily pressing and releasing the MEMO button stores the current program data information within the CRSR-10’s memory.
Activating the Song (S-Seek) Alert 1. Press and hold the MEMO button for 2 seconds to enter the S-Seek Mode. 2. Press and Release the SELECT Button. A pop-up screen displaying two selectable options “Delete” and “S-Seek” will appear (below left). 3. Use the CHANNEL Button to highlight the “SSeek” option. 4. Press and release the SELECT Button and an SSeek confirmation screen will appear. Select the “ On“” option using the CHANNEL Button and press the SELECT Button to confirm (below right).
Display Settings To adjust the Brightness and Contrast of the CRSR10’s LCD display, either press the DISP Button on the face of the CRSR-10 or while in the “Menu Options” list, perform the following steps: b. Brightness Control: Use to adjust the overall brightness of the LCD display. Use the CHANNEL Button to adjust the Brightness up or down. The bar graph on the screen will move to indicate the change. 1. Use the CHANNEL Button to highlight the “Display Settings” option.
Use the CHANNEL Buttons to scroll through the list of available frequencies. Use the CAT. Buttons to scroll 5 lines at a time for faster Frequency search. Press the SELECT Button to choose the desired frequency. Be sure to change your car or home stereo’s FM frequency to the same frequency as the CRSR-10. To exit the FM Transmitter Options, simply push the MENU button.
Antenna Aiming Changing the Lock/Unlock Code The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “0000”. This code can be maintained or changed. To change the default lock code, perform the following procedure while in the “Menu Options” List mode: 1. Use the CHANNEL Button to highlight “Lock Options”. Press the SELECT Button to select. 2. Select “Edit Code” (top left) from the Lock Options Menu and press the SELECT Button to select. 3.
Memory Options Time Features In this mode, the user can turn the Memory Search Function (S-SEEK) On or Off. In addition, all 20 Preset Memory Locations can be cleared. To change the Memory Options, use the following procedure while in the “Menu Options” List mode: This Menu Option allows for adjustments of the following items: Clock Auto Shutdown Alarm Clock Sleep Mode Program Alert 1. Use the CHANNEL Button to highlight the “Memory Options”. Press the SELECT Button select. to b.
the display followed by the alarm options: • Set Alarm: Use the CHANNEL Button to select “Set Alarm” From the Alarm Clock Menu. Select either“ Off” (Default) or “”On” from the Menu and press the SELECT Button to set the alarm On or Off. • Time: Use the CHANNEL Button to select “Time” from the Alarm Clock Menu. Press the CHANNEL Button to set the time you want the CRSR-10 to activate (Default is 12:00 PM). Press the SELECT Button to store the Alarm Time. c.
Factory Default This Menu option is designed to restore all the original factory settings. To activate the Factory Default perform the following procedure while in the “Menu Options” List mode: 1. Use the CHANNEL Button to highlight the “Factory Default” option. Press the SELECT Button to select. “Restore Settings” will pop up on the CRSR-10’s display (below right). 2. Use the CHANNEL Button to highlight “Yes” to restore all the settings or select “No” to return to the Menu Options List Mode.
Specifications Troubleshooting FAULT PROBABLE CAUSE REMEDY Blown Fuse, power cable not properly Check fuse, check power cable Satellite antenna not connected Check satellite connection to CRSR-10 Antenna or cable is faulty Contact system installer or vendor FM modulator frequency contains static 1. Switch to another FM frequency 2. Move CRSR-10 closer to car FM antenna 3.
Important Information: Optional Accessories Add one or all of these accessories to maximize your Sanyo experience. BMBX-10 Portable Boombox FM Switching Box The BMBX-10 Boombox is a portable docking station and audio system for the Sanyo CRSR10. The built-in amplifier and speakers delivers rich, powerful sound indoors or outdoors. The FM Switching Box is an optional accessory if you choose to hard-wire your CRSR-10 to your car’s audio system instead of using the built-in wireless FM Transmitter.
SANYO MOBILE AUDIO MODEL CRSR-10 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
