USER GUIDE SiriusXM Dock & Play Radio VEHICLE KIT INCLUDED
If you experience problems with the operation or performance of your SiriusXM product, DO NOT RETURN THIS PRODUCT TO YOUR RETAILER. Call SiriusXM Listener Care at 1-866-746-7961 and speak to one of our service representatives.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety and Care Information . . . . . . . . . . 7 What’s in the Box? . . . . . . . . . . . . . . . . . . . 9 Edge Button Functions . . . . . . . . . . . . . . 10 PowerConnect Vehicle Dock . . . . . . . . . . . 11 Where Else Can You Use Your Edge? . . . . . . . . . . . . . . . . . . . . . . 69 Configuring Your Edge . . . . .
Introduction 5
Introduction Features Thank you for purchasing the SiriusXM Edge with Vehicle Kit! SiriusXM Edge has these exciting features to enhance your overall experience: • Enjoy Xtra channels— including channels dedicated to Hispanic programming.* • Pause, rewind and replay live satellite radio. • View artist name, song or program title, and channel information on the large color graphic display.
Safety and Care Information IMPORTANT! Self installation instructions and tips are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM or third party products.
Introduction Warning! • Opening the case may result in electric shock. • If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care. If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water, and induce vomiting.
What’s in the Box? menu fm 1 2 3 4 5 6 7 8 9 0 # jump Edge Radio PowerConnect Vehicle Dock Aux In Cable Dash Mount Vent Mount and Extended Vent Clamps Cable Routing Adapter PowerConnect Power Adapter Magnetic Mount Antenna Antenna & Dash Mount Alcohol Preparation Pads 9
Introduction Edge Button Functions Power Button Press to turn Radio on and off. FM Button Press to access and cycle through FM presets. Menu Button Press to access advanced features and configuration options; in configuration options, press and hold to return to main display screen. menu fm 1 2 3 4 5 6 7 8 9 0 # 10 Direct Button Press first before entering the channel number, to directly tune to a channel.
PowerConnect Vehicle Dock Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes it simple to connect. Just match the colors on the cable ends to the colors on the dock to see what goes where. Rear View AUDIO AUDIO (Green) Connection for Aux In Cable or optional Cassette Adapter (sold separately). ANT PWR ANT (Silver) Connection for the Magnetic Mount Antenna. PWR (Red) Connection for PowerConnect Power Adapter.
Introduction Wire Guide The PowerConnect Vehicle Dock has a wire guide at the top rear that can help you to organize the cables and wires connected to the dock. If you need to bring a cable or wire from one side of the dock to the other, utilize the wire guide by looping the cable though the wire guide as shown.
Vehicle Installation 13
Vehicle Installation WARNING! DO NOT attempt to install Edge while driving. Park your vehicle in a safe location before beginning installation. Step 1: Choose a Location for Your Radio When installing Edge in your vehicle, choose a location where it will not block your vision, interfere with the controls, or obstruct the air bag.
Option 3 A. Option 4 Option 5 B. B.
Vehicle Installation Step 2: Install the Dash or Vent Mount Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount. IMPORTANT! When you install the chosen mount, do not attach the dock to the mount. All cables should be attached to the dock prior to connecting the dock to the mount. Installing the Dash Mount: CAUTION! The adhesive used on the Dash Mount may be difficult to remove.
3 The dock mounting plate can be tilted in different directions. Adjust as necessary for your particular vehicle. When the orientation is correct, tighten the knob. Knob Adhesive Foot Dock Mounting Plate 4 Clean the surface with the alcohol preparation pad and let it dry thoroughly. 5 Peel off the adhesive liner. Position, press, and hold the Dash Mount in place for 30 seconds. IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of 2-4 hours before using the mount.
Vehicle Installation Installing the Vent Mount: 18 Extended Vent Clamps 1 Locate a vent with horizontal louvers sturdy enough to hold your PowerConnect Vehicle Dock and Radio. 2 Short Vent If the vent louvers in your vehicle are Clamps recessed, you may need to use the longer vent clamps with the Vent Mount. If so, remove the shorter vent clamps and install the longer ones into the Vent Mount. Be sure to observe the orientation of the vent clamps as shown.
4 Rest the foot against the bottom of the vent (2), and adjust the tilt of the Vent Mount by repositioning the foot to a different adjustment hole (3). 1 2 3 Dash Dash Dash HOOKED PUSH Vent Foot Louver Vent Vent TILT ADJUSTMENT HOLES To remove the Vent Mount, push the mount into the vent. Then lift up until disengaged from the rear of the vent louver, and remove the Vent Mount.
Vehicle Installation Step 3: Mount the Magnetic Mount Antenna Mount the Magnetic Mount Antenna on the outside of your vehicle, on a horizontal surface that will always face the sky. The antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle. To install the Magnetic Mount Antenna: 1 Choose the best location for your antenna considering your vehicle type.
SUV: We recommend mounting the antenna at the rear of the roof as shown. Convertible: We recommend mounting the antenna at the leading edge of the trunk as shown. Pickup Truck: We recommend mounting the antenna just above the front windshield as shown. IMPORTANT! Consult a professional installer if your vehicle roof or hood is non-metallic (i.e., fiberglass), or you have difficulty finding a location for your antenna.
Vehicle Installation 3 If you are installing the antenna at the roof edge, or hood edge, install the Cable Routing Adapter to direct the antenna cable downward.
4 Place the antenna in the location you selected. Follow the Tips and Cautions shown on the next several pages. TIP! Mount the antenna on the roof (for most vehicles) or trunk (for convertibles) where it has a clear view of the sky in all directions.
Vehicle Installation CAUTION! Don’t mount the antenna inside the vehicle, for example, on the dashboard. CAUTION! Don’t mount the antenna on any of the vehicle’s front, back or side pillars. CAUTION! Don’t mount the antenna close to a roof rack. Adjust the rack so it’s further away from the antenna or move the antenna closer to the center of the roof.
CAUTION! Don’t mount the antenna close to another antenna. Mount it at least 3 inches away.
Vehicle Installation Step 4: Route the Magnetic Mount Antenna Cable Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable. Then route your antenna cable according to the instructions which follow for your specific type of vehicle.
Route cable out from under rear windshield moulding and tuck into weatherstripping around trunk opening Avoid sharp bends by running cable through weatherstripping for several inches Pull weatherstripping from trunk opening Tuck cable into weatherstripping.
Vehicle Installation Bring cable out of weatherstripping and into trunk Route cable along trunk wall and into cabin through gap or conduit, along existing wiring harness Route cable along trunk wall and into cabin 28
Use a blunt plastic putty knife or similar blunt tool to lift edge of interior trim and tuck cable under trim.
Vehicle Installation Continue routing cable under carpet or console to radio location Pull carpet or mat back Coil excess cable under carpet or mat Bring cable out from trim Bring cable out from trim and route under carpet to dashboard or console TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door.
Sedan/Coupe With Antenna Placed at the Rear of the Roof: 1 Feed the antenna cable from the antenna underneath the rubber molding around the rear window. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the antenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, we recommend consulting a professional installer.
Vehicle Installation 5 Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately). 6 Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties. 4 Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock. 5 Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 37.
Vehicle Installation logos. Be careful not to crimp or cut the cable. 3 Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately). 4 Bring the end of the cable out at the PowerConnect Vehicle Dock location.
underneath. Avoid side airbag locations on back pillars and above the doors. Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable. 4 Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately).
Vehicle Installation the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening. 36 4 Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties. 5 Bring the end of the cable out at the PowerConnect Vehicle Dock location.
Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter 1 Plug the Magnetic Mount Antenna into the silver ANT connector on the PowerConnect Vehicle Dock. 2 Insert the PowerConnect Power Adapter into your vehicle’s cigarette lighter or power adapter socket. 3 Plug the PowerConnect Power Adapter into the red PWR connector on the dock.
Vehicle Installation Step 6: Connect the Audio To play XM audio through your vehicle’s stereo or FM radio, decide on one of the following audio connection options: • Option 1: Best: Use the provided Aux In Cable if your vehicle’s stereo system has an auxiliary input connection or jack. Refer to your vehicle’s owners manual to find the location of the auxiliary input jack, or consult the vehicle dealer.
Option 1: Aux In Cable Installation Instructions 1 Plug one end of the Aux In Cable into the green AUDIO connector on the dock. AUDIO 2 Plug the other end into the auxiliary input jack of your vehicle’s stereo system. 3 Attach the dock to the mount. 4 Insert your Edge into the dock. 5 Power on your Edge by pressing the Power button. 6 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the XM signal.
Vehicle Installation good, press and hold menu to return to the main display screen. 7 Ensure Edge is tuned to channel 1, the XM Preview channel. Upon power up, Edge should tune to channel 1 by default, when it’s not yet activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 55 to learn about how to tune a channel. 8 Turn on your vehicle’s stereo system. Set it to play from the auxiliary input source.
Option 2: Cassette Adapter Installation Instructions 1 Plug the Cassette Adapter into the green AUDIO connector on the dock. 2 Insert the Cassette Adapter into the vehicle’s cassette deck. You may need to turn on your vehicle’s stereo system in order to do so. AUDIO ANT PWR FM 3 Attach the dock to the mount. 4 Insert your Edge into the dock. 5 Power on your Edge by pressing the Power button. 6 Be sure the vehicle is outside and the antenna has a clear view of the sky.
Vehicle Installation good, press and hold menu to return to the main display screen. 7 Ensure Edge is tuned to channel 1, the XM Preview channel. Upon power up, Edge should tune to channel 1 by default, when it’s not yet activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 55 to learn about how to tune a channel. 8 Turn on your vehicle’s stereo system. Set it to play from the auxiliary input source.
Option 3: PowerConnect Installation Instructions 1 Attach the dock to the mount. 2 Insert your Edge into the dock. 3 Power on your Edge by pressing the Power button. 4 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the XM signal. There should at least be one bar on the upper left corner of the main display screen that denotes antenna signal strength.
Vehicle Installation a. Use the SiriusXM FM Channel Finder at www.siriusxm.com/fmchannel. Go to the website and enter your zip code. The Channel Finder will suggest a list of available FM channels in your area. For convenience, write down or print out the list. OR b. Manually tune through your local FM channels on your vehicle’s FM radio. Locate and create a list of channels that aren’t being used by any FM radio station. Write down the list.
have to disable AUX Detect. Refer to “Using the Vehicle Dock From the Universal Xpress Car Kit” on page 88, and complete the additional instructions before continuing with the next step. The audio connection will be through your vehicle’s FM radio, but it is not PowerConnect. menu 90.1 fm 1 2 3 4 5 6 7 8 9 0 # jump MATCH FM CHANNELS 8 Set your Edge to transmit on the same FM channel that you have selected in step 7: i. Press menu. ii.
Vehicle Installation i.e., 99.3 to 99.5. Press and to tune in steps of 1, i.e., 99.3 to 100.3. Press the Select button to select the FM channel. vi. Start Using is highlighted. Press the Select button. 9 vii. The FM channel you selected will be confirmed on the display screen. Edge will tune to the FM channel. You should hear channel 1, the XM Preview channel, through your vehicle’s FM radio. If you are satisfied with the sound quality, the installation is complete.
Subscribe 47
Subscribe You can either follow the general activation and subscription process or use the on-board activation guide to activate your Edge and subscribe to the SiriusXM service. General activation and subscription process: 1 Make sure your Edge is turned on, tuned to channel 1, the XM Preview channel, and receiving the XM signal so that you can hear the XM audio. 2 Make a note of the Radio ID.
activated, Edge will display an alert message. To continue, press any button. Turn the Rotary Knob to tune to other channels, and press or to browse the different categories of channels. Learn what all the buttons do by turning to “Navigation Basics” on page 53. Activation guide: For your convenience, Edge has an on-board activation guide. You can activate your Radio and subscribe to the SiriusXM service by using this guide, where you will be guided step-by-step through the subscription process.
Using Your Edge 51
Using Your Edge The Main Display When listening to a channel, information about the channel and what is currently playing is displayed.
Navigation Basics Power Button Pressing the Power button turns Edge On or Off. Rotary Knob and Select Button • Rotary Knob: Rotating clockwise or counter-clockwise previews and tunes to channels through the channel line up. Also, scrolls through lists and highlights an item in the list. • Select button (press and release): Pressing in the center selects a highlighted item in a menu or list and confirms settings.
Using Your Edge FM Button fm Pressing FM provides easy tuning of FM presets for optimized PowerConnect performance. Repeatedly pressing FM displays and cycles through the list of preset FM channels one at a time. The Radio automatically tunes to the displayed FM channel. Pressing and holding FM accesses the FM Settings menu. It is not available when an Aux In Cable or Cassette Adapter is used for audio connection.
Listening to Satellite Radio Tune to a channel: Turn the Rotary Knob to immediately tune to the next or previous channel. When changing channels, the channel category will be displayed briefly at the top left of the screen. Channel Tuning set to Tune by Channel View a category: Channels are organized into categories to make it easier for you to find the ones that suit your taste. To view channels in a category in list mode press or .
Using Your Edge Direct Tune A channel can be tuned directly by entering the channel number using the number buttons. 1 To directly tune to a channel press #. 2 Use the number buttons 0-9 to enter the channel number and wait a moment until the channel is tuned, or press the Select button to immediately tune to the channel.
Favorite Channels You can set up to 10 of your favorite channels so you can easily access them. Each favorite channel can be assigned to a number button. To assign a favorite channel to a number button: 1 Tune to the desired channel. 2 Press and hold a number button between 0-9 that you want to assign to that favorite channel. An advisory with the channel number and name will be displayed on the screen confirming that the channel has been assigned.
Using Your Edge Scanning Channels in a Category You can scan a category and listen to each channel for 10 seconds before Edge automatically tunes to the next channel. If you want to stay tuned to the channel being played and stop the scan, just press the Select button. To scan a category: 58 1 Press 2 Scroll down to highlight the last item in the category which will be Scan and the category name. 3 Press the Select button. The scan will begin.
FM Presets FM presets make it easy to quickly access stored FM channels and choose a new FM channel from them. Use FM presets when you use PowerConnect or the FMDA to listen to your Edge through your vehicle’s FM radio. (Refer to “Option 3: PowerConnect Installation Instructions” on page 43 for more information.) To use a different FM preset: 1 Press FM to display the current FM preset. 2 To display and select the next FM preset, press FM. The Radio will tune to the displayed FM channel.
Special Features 61
Special Features Pause & Replay Pause & Replay gives you the opportunity to “hear that again” by temporarily storing and letting you access content of the currently tuned channel which played in approximately the last 30 minutes. Pressing or places Edge into Replay mode. TIP! This feature applies to the current channel to which you are listening, and for the current tuning and listening session only. Changing channels or turning off Edge removes the temporarily stored content from the Radio.
and resumes playing the live broadcast. To listen to the previous track: 1 Press and release program. 2 Repeated press and releases skips backwards to the start of the previous songs or programs until the beginning of the stored audio is reached. When the beginning is reached, playback automatically begins.
Special Features Parental Controls Edge has a parental control feature which allows you to lock access to channels, or lock access to an entire category. A 4-digit code controls access to the locked channel or locked category. When you browse a category, the channel information of the locked channel will be shown but not the artist and song/program information. Instead, a lock icon and the word “Locked“ is shown.
i. For each digit, press one of the 0-9 keys (or turn the Rotary Knob to select digits) and then press to advance to the next digit. (Press if you need to go back and edit a previous digit.) ii. When you have selected all 4 digits of your code press the Select button. iii. The Code Confirmation screen will be displayed. For your records, write down the code you have selected. Press the Select button. Continue with step 3.
Special Features To lock (or unlock) channels or categories: 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Parental Controls. Press the Select button. 3 You will be prompted to enter the 4-digit code. For each digit, press one of the 0-9 keys (or turn the Rotary Knob to select digits) and then press to advance to the next digit. (Press if you need to go back and edit a previous digit.) 4 When you have entered all 4 digits of the code press the Select button.
locked channel or category, simply highlight the locked channel or category and press the Select button. The lock icon will disappear indicating the channel or category is unlocked.) 8 You can continue to lock and unlock as many channels or categories as you wish. When you are finished, press and hold menu to return to the main display screen. To change your code: 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Parental Controls. Press the Select button.
Special Features you need to go back and edit a previous digit.) 8 The Code Confirmation screen will be displayed. For your records, write down the code you have selected. Press the Select button. 9 Press and hold menu to return to the main display screen. To listen to a locked channel: There are two ways to tune to a channel which has been locked. The first is to directly tune to the locked channel, and the second is to select the locked channel from a category list.
Where Else Can You Use Your Edge? 69
Where Else Can You Use Your Edge? SiriusXM offers a variety of accessories that allow you to adapt your Edge to your lifestyle and enhance your listening experience. With these accessories, you can effortlessly take your satellite radio listening experience from your vehicle to your home or office or on the go — all with a single subscription. • In Your Home, Office, etc. – With a Home Kit, you can play your Edge through your existing stereo system or powered speakers.
Configuring Your Edge 71
Configuring Your Edge Radio ID Your Edge has an 8 character alphanumeric ID which uniquely identifies your Radio. This ID is used during the subscription process. To display the Radio ID: 1 Press menu. 2 Radio ID will be highlighted. If it is not highlighted, turn the Rotary Knob to scroll to and highlight Radio ID. Press the Select button. The Radio ID will be displayed. 3 Press and hold menu to return to the main display screen.
• Tune by Category: Channels are grouped and displayed according to their category such as Rock, Pop, Christian, etc., regardless of numerical channel number. Once you have scrolled through all the channels in a category, the channels in the next category are shown. The numerical channel numbers are not shown when channels in a category are viewed in list mode. To change the Channel Tuning mode: 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Channel Tuning and press the Select button.
Configuring Your Edge radio. We recommend one of the following methods to find an available FM channel: 1 Use the SiriusXM FM Channel Finder Use the SiriusXM FM Channel Finder at www.siriusxm.com/fmchannel. Go to the website and enter your zip code. The Channel Finder will suggest a list of available FM channels in your area. For convenience, write down or print out the list. Tune Edge to a favorite XM channel (or to channel 1, the XM Preview channel, if it’s not activated).
channel, if it’s not activated). Pick the first FM channel on your list and tune the FM radio to that channel. Then tune Edge to the same FM channel. (Refer to “Set and Select an FM Channel” on page 76.) You should hear the XM channel through your vehicle’s radio. If you are satisfied with the sound quality, you’re done! If this FM channel doesn’t work well for you, work down the list until you find an FM channel that allows you to hear XM clearly.
Configuring Your Edge Set and Select an FM Channel Edge allows you to easily store (i.e., preset) up to 5 different FM channels. At any time, you can select any one of these 5 FM presets to hear SiriusXM through your existing vehicle radio. Having a choice of 5 FM presets also makes it easy to switch to the appropriate FM channel as you travel from one area to another. Each FM preset is stored in its own storage location. You can easily add or edit the FM preset in any one of the 5 storage locations.
ii. If the chosen storage location has an FM preset that is not currently being used, and you want to edit it, Edit Channel is highlighted. Press the Select button. The FM channel tuning screen is displayed. iii. If the chosen storage location has an FM preset that is not currently being used, and you want to start using it, turn the Rotary Knob to highlight Start Using and press the Select button. Skip to step 7. 5 Turn the Rotary Knob to tune to the desired FM channel in steps of .2, i.e., 99.3 to 99.5.
Configuring Your Edge To quickly select an FM preset: 78 1 Press FM to display the current FM preset. 2 To display and select the next FM preset, press FM. Edge will tune to the displayed FM channel. If the preset is the one you want, press menu or wait for the screen to timeout. 3 Repeatedly pressing FM will cycle through the FM presets. 4 Set your vehicle’s FM radio to same FM channel.
Jump Settings The jump button can be configured to either jump to the traffic and weather for the city of your choice from a list of 22 of the most congested cities, or to jump back to the last channel to which you were listening. When configuring for traffic/ weather, you’ll need to select your city. To configure jump: 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight JUMP Settings and press the Select button. 3 Mode will be highlighted with either Last Channel or Traffic/Weather.
Configuring Your Edge the Rotary Knob to scroll to and highlight your desired city and press the Select button. 7 The JUMP Settings screen will display the location you selected. Press and hold menu to return to the main display screen. Set Brightness To change the display’s brightness: 80 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Brightness and press the Select button. 3 Turn the Rotary Knob to increase the brightness of the display.
Set Audio Level The audio level of Edge can be adjusted when an audio connection is made between the dock and the vehicle’s stereo system. Audio level is used to adjust Edge’s volume level to match the volume of other audio sources you may use, such as a CD player, other FM stations, or an MP3 player. Do not use the audio level as a volume control. Use the volume control on your vehicle’s stereo instead. To adjust the audio level: 1 Press menu.
Configuring Your Edge Signal Indicator For best reception, your Magnetic Mount Antenna should have an unobstructed view of the SiriusXM satellites. In large cities, there are terrestrial transmitters (ground repeaters) to help increase the signal coverage. Your Edge can display the received strength of the satellite and terrestrial signals being received. To display the signal strength: 82 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Signal Indicator and press the Select button.
Auto Shut Off When Edge is in a Vehicle Dock, and Auto Shut Off has been enabled, Edge will automatically shut off after 8 hours of inactivity, i.e., when no buttons have been pressed. This feature prevents the vehicle battery from being discharged if you forget to turn your Edge off. When Edge is about to shut off, the message Auto Shut Off, Started auto shut off due to inactivity is displayed, followed by Press any button to cancel. If you wish to continue listening, press any button.
Configuring Your Edge Factory Settings The factory settings menu has two choices, AUX Detect and Restore Defaults. AUX Detect AUX Detect allows Edge to automatically detect a connection made to the AUDIO connector of the PowerConnect Vehicle Dock by an Aux In Cable or Cassette Adapter. AUX Detect is enabled by default. IMPORTANT! If you are using the PowerConnect Vehicle Dock which came with your Edge, AUX Detect should remain enabled.
button to toggle the setting. 4 5 6 A warning screen will be displayed. Press the Select button to confirm that you want to disable AUX Detect. If you want to cancel press menu to return to Factory Settings. AUX Detect will remain enabled. AUX Detect will show as disabled. Press and hold menu to return to the main display screen. To enable AUX Detect (Do this when the Radio is transferred to the PowerConnect Vehicle Dock from an older model Vehicle Dock.) 1 Press menu.
Configuring Your Edge Restore Defaults You can clear all of your personal settings, such as favorite channels, FM presets, etc., and return the Radio to its original out-of-the-box settings To reset Edge to factory defaults: NOTE! Restoring defaults permanently removes all personal settings. 1 Press menu. 2 Turn the Rotary Knob to scroll to and highlight Factory Settings and press the Select button. 3 Turn the Rotary Knob to scroll to and highlight Restore Defaults and press the Select button.
Demo Mode Your Edge has a demo mode that starts playing when, for a prolonged period of time (more than 1 hour), the Radio either detects it’s not connected to the antenna, or the antenna stops receiving a signal. It disappears when the antenna is connected properly or when the Radio starts receiving a signal. You can also exit demo mode at any time, by pressing and holding the Select button for 10 seconds. If desired, you can also manually put Edge in demo mode.
Configuring Your Edge 6 To exit demo mode at any time, press and hold the Select button for 10 seconds. Using the Vehicle Dock From the Universal Xpress Car Kit If you have chosen to use the Vehicle Dock from the Universal Xpress Car Kit rather than the PowerConnect Vehicle Dock included with your Edge Radio, you will need to complete some additional installation steps. When you have completed these additional steps, you can continue with the installation of your Edge.
If you are connecting the audio using the Aux In Cable or Cassette Adapter: 1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 84, and disable AUX Detect. TIP! The FM Transmitter must be Off. To verify that the FM Transmitter is Off, refer to “Turn FM Transmitter On/Off” on page 89. 2 Continue with the installation.
Configuring Your Edge Press the Select button to toggle the setting from Off to On. 4 The FM Channels menu item will now be accessible, allowing you to tune Edge and the FM radio in your vehicle to the same FM channel. TIP! Edge is programmed with FM channel 97.9 as the default setting.
Troubleshooting 91
Troubleshooting Edge has been designed and built to be trouble-free but if you experience a problem, try this: • Check that all connections are firm and secure. • Make sure the vehicle power socket is clean and free of corrosion. • Make sure you have connected Edge as described in this User Guide. Verify that the PowerConnect Power Adapter is plugged into the vehicle’s cigarette lighter or power adapter socket, and that the LED on the PowerConnect Power Adapter is lit (on).
If you see this on the screen: Try this: Acquiring Signal • Your Edge is acquiring audio or program information. This message usually goes away in a few seconds. Updating • Your Edge is updating with the latest encryption code. Wait until the update is done. • You may be trying to tune to a channel that is blocked or unavailable. Tune to another channel. — • No program information, such as artist name, song title, or channel exists.
Troubleshooting If this happens: Try this: No audio when using the Aux In Cable or Cassette Adapter • Check all cables between your Edge and your vehicle’s stereo system for a firm and secure connection. • Ensure you have selected the proper input source on your vehicle’s stereo system. • Increase the audio level of Edge. Refer to “Set Audio Level” on page 81. • If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in Edge is turned Off.
If this happens: Try this: No audio when using PowerConnect or FMDA • Check that your Edge and your vehicle’s FM radio are tuned to the same FM channel. • For PowerConnect, ensure you are using the PowerConnect Vehicle Dock and PowerConnect Power Adapter. • If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in Edge is turned On. Refer to “Turn FM Transmitter On/Off” on page 89.
Product Specifications 97
Product Specifications System Power Requirements: Operating Temperature: Audio Output: 9-16 V DC, 500 mA (max) -4°F to +140°F (-20°C to +60°C) 1.5 Vrms (max) Edge Radio Dimensions: Weight: 4.6 in (width) x 2.6 in (height) x 0.7 in (depth) 117 mm (width) x 65 mm (height) x 17 mm (depth) 4.0 oz (112 g) PowerConnect Vehicle Dock Dimensions: Weight: Audio Connector: Antenna Connector: 4.0 in (width) x 2.3 in (height) x 1.2 in (depth) 102 mm (width) x 65 mm (height) x 30 mm (depth) 1.
Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product. Furthermore, the AMBEª voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc.
FCC Statement The user is cautioned that changes or modifications not expressly approved by Sirius XM Radio Inc. can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Copyrights and Trademarks ©2011 Sirius XM Radio Inc. “Sirius”, “XM” and all related marks and logos are trademarks of Sirius XM Radio Inc. “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license. BBC logo © BBC 1996. Radio 1 logo © BBC 2001. Cosmopolitanª is a registered trademark of Hearst Communications, Inc. Elvis Radio logo © EPE Reg. U.S. Pat & TM off. IndyCar (and Design) are registered trademarks of Brickyard Trademarks, Inc., used with permission.
Owners Record The Radio model number is located below and the Radio ID is located on the label on the back of Edge. Record the Radio ID in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.
SiriusXM 90-Day Limited Warranty What This Warranty Covers This warranty covers defects in material and workmanship for 90 days from the date of purchase by the original retail purchaser only. Sirius XM Radio Inc., at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SiriusXM.
Sirius XM Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1.866.635.2349 © 2011 Sirius XM Radio Inc. SX1EVKUG 090111a siriusxm.