User's Manual

Subscribing to XM

DRAFT DRAFT

Before you can listen to or record XM content, you must activate your inno.

1. Set up your inno, cradle, power adapter, and antenna (page 20 or page 22). Make sure inno

can receive the XM signal.

2. Place inno in the “Live XM” mode (page 26).

3. Find the 8-character XM Radio ID, which is printed on the package or in the battery com-

partment underneath the battery. Or select XM channel 0 to view the Radio ID. Record the

Radio ID here for reference:

■ ■ ■ ■ ■ ■ ■ ■

The XM Radio ID does not use the letters I, O, S, or F.

4. Activate your XM Satellite Radio service online at http://activate.xmradio.com or by calling

1-800-XM-RADIO (1-800-967-2346). You will need a major credit card.

XM will send a signal from the satellites to activate the full channel lineup. A c t i vation normally

takes 10 to 15 minutes, but during peak busy periods you may need to keep your player on

for up to an hour. When you can access the full channel lineup on your inno, you’re finished!

eng_usergd.qxd 2/21/06 2:28 PM Page 18