User's Manual

Settings

DRAFT DRAFT

Restoring Factory Defaults

To restore all inno settings and preferences to a “factory fresh” state:

1. Select XM ➝ Settings ➝ Setup ➝ Restore Defaults.

2. You should see this display:

3. Confirm by selecting Yes, or cancel by selecting No.

Memory Partition

The internal storage in inno can store recorded XM content and MP3/WMA files. By default,

the storage is divided 50/50, but you can select different memory partitions:

To change the memory partition:

1. Select XM ➝ Settings ➝ Setup ➝ Memory Partition.

2. Highlight the desired setting and press the XM button.

3. Confirm by selecting Yes, or cancel by selecting No.

setting typical storage for content typical storage for PC

recorded from XM (MP3 and WMA) tracks

50/50 XM/PC files 50 hours 16 hours

100% XM 100 hours 0 hours

CAUTION: When you change the memory partition, you will erase all your stored XM content

and MP3/WMA tracks from your inno.

Restore just the settings to

factory defaults.

Restore settings to factory

defaults and erase all music.

eng_usergd.qxd 2/21/06 2:28 PM Page 80