User's Manual

Installation

Mounting to the Windshield

1. Insert the 2 suction cups into

the larger side of the holes

on the car mounting bracket

and slide outward to lock in

place. (Figure 1).

2. Loosen the thumb screw and

rotate the Sportscaster car

mount to the appropriate

angle for your vehicle's

windshield. Retighten the

thumb screw. Place the

suction cups on the

Sportscaster car mount in an

appropriate location on your

windshield. Press firmly to

secure the car mount in

place. (Figure 2).

3. Push the Sportscaster into

the car mount until it locks

into place. (Figure 3).

4. Connect the DC Power,

antenna and audio

connectors (if required) to

the appropriate jacks.

(Figure 3). Use the cassette

adapter if your vehicle’s

audio system has a built-in cassette player.

5. For best reception, place the XM antenna on the vehicle’s metallic roof, at least 6”

from any window or sunroof. It can be placed in the front, middle, or rear of the

roof. (Figure 4).

6. For instructions on installing your FM Transmitter please refer to the Coupler

Installation Guidelines.

7. To remove the Sportscaster, push the release tab on the top of the car mount

upward and pull the Sportscaster forward.

If the car is a convertible, you may mount the antenna on the metal trunk lid. It

should be at least 4” from the rear window. Ensure that the antenna and cable

don’t interfere with the opening or closing of the convertible top or the trunk lid.