User's Manual

Installation
11
Installation
Mounting in the Home
1. Push the Sportscaster into the
home mount until it locks into place.
(Figure 1).
2. Connect the AC Power and antenna
to the appropriate jacks. (Figure 2).
3. Connect the audio cable to the
appropriate jack. (Figure 3).
4. Place the antenna on a window or
an exterior wall so that it points
south. (Figure 4).
5. To Remove the Sportscaster, push
the release tab on the top of the
home mount upward and pull the
Sportscaster forward.
Installation
Using the Portable Battery Kit
1. Attaching the battery to your
Sportscaster is simple. First, install
battery by lining up the battery with
the slots in the back of your
Sportscaster. Next, slide the
battery into place until it is locked.
(Figure1). For a complete charge,
the battery must be charged for
approximately 3 hours. The battery
life is approximately 4 hours.
2. To attach the belt clip onto your
Sportscaster, push the Sportscaster
into the belt clip until it locks into
place. (Figure 2).
3. Plug the connector of the integrated
XM antenna headset into the
connectors with the wire exiting
upwards as shown in (Figure 3).
4. To remove the Sportscaster, push the release tab on the top of the belt clip
upward and pull the Sportscaster forward.