User's Manual

Installation

Mounting to the Dashboard or Console

If using the AMPs mounting holes

to fasten the Sportscaster car

mount to your dash or console,

Bolt or screw the Sportscaster

car mount in place and proceed to

step 3. AMPs is the standard hole

spacing used in most mobile

phone mounts.

1. Remove the protective film

from one side of the supplied

double sided tape. Press firmly

to secure the tape to the

bottom of the car mount.

(Figure 1).

2. Remove the protective film

from the remaining side of the

double sided tape. Place the car

mount in the appropriate loca-

tion on the vehicle's dash or

console and press firmly.

(Figure 2).

3. Push the Sportscaster into the

car mount until it locks into

place. (Figure 3).

4. Connect the DC Power, antenna

and audio connectors (if required) to the appropriate jacks. (Figure 3). Use the

cassette adapter if your vehicle’s audio system has a built-in cassette player.

5. For best reception, place the XM antenna on the vehicle’s metallic roof, at least 6”

from any window or sunroof. It can be placed in the front, middle, or rear of the

roof. (Figure 4).

6. For instructions on installing your FM Transmitter please refer to the Coupler

Installation Guidelines.

7. To remove the Sportscaster, push the release tab on the top of the car mount

upward and pull the Sportscaster forward.

If the car is a convertible, you may mount the antenna on the metal trunk lid. It

should be at least 4” from the rear window. Ensure that the antenna and cable

don’t interfere with the opening or closing of the convertible top or the trunk lid.