User's Manual

Menu Commands and Settings

Pressing enters the menu section of Roady2. Here, you can change each of

the following options using the Tuning Wheel . Select the highlighted item by

pressing the Tuning Wheel . While in the menu section, acts as a “back”

button, allowing you to back out of existing sections. Following are the settings

that can be changed:

Screen Color

Change the color of the display by simply using the Tuning Wheel to scroll

through the seven color choices. Select a new color by pressing the Tuning

Wheel .

Contrast

This control allows you to adjust the contrast of your display.

FM Frequency

Roady2’s internal FM modulator can be used to send the audio to a nearby

radio using an unused FM band. It is automatically enabled whenever the

audio jack is unplugged from the side of Roady2. This menu command

allows you to use the Tuning Wheel to select the FM rebroadcast

frequency.

First, ensure that there are no connectors (such as the cassette tape adaptor

connector) in the audio jack. Then, find an open FM frequency on your car (or

home/portable) radio by using its tuning knob or buttons to sample the following

frequencies, selecting the one that does not have an existing FM radio station on

it and has the least amount of interference from neighboring FM stations:

88.1 88.3 88.5 88.7 88.9 106.7 106.9 107.1 107.3 107.5 107.7 107.9

Section 4