User's Manual

TuneSelect™
Using this function, you can program your Roady2 to alert you with a
tone and display change when a favorite song is played again on a
channel other than the one you are listening to.
1. While the song is playing, press and hold the Tuning Wheel in
for 2 seconds. Roady2 will beep and display “Song Selected” on
line 1 of the display for 2 seconds, then return to normal display for
the current song. Up to 20 songs may be stored in the TuneSelect
list. Once the list is filled, a new entry will replace the oldest item on
the list. You can erase songs from your TuneSelect list by going into
the menu and choosing TuneSelect. Then, follow your options to
erase specific song titles or clear out all titles.
2. When the song plays again on any channel other than the one you
are currently listening to, your Roady2 will beep and display an alert
notice. “Song Found” will appear on line 1 and the name of the
song on line 2 for 5 seconds.
3. While the “Song Found” alert is displayed, push the Tuning Wheel
in to switch to the channel playing the song. If the Tuning
Wheel is not pressed while the alert is displayed, TuneSelect
will time out and return to normal display mode.
Section 4
14