User's Manual

Section 1

Getting Started: Activating Roady2

To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps:

1. Set up your Roady2 using the installation instructions in Section 5 of this

guide (see page 17) or with the help of a professional installer.

2. Press the power button to turn the Roady Receiver on and verify that it

is playing Channel 1, the XM Preview Channel.

3. Select Channel 0. The receiver’s eight-character XM Satellite Radio ID

number will appear on the display. Write the number here:

4. Activate your XM Satellite Radio service. To subscribe, make sure you

have a major credit card and your XM Satellite Radio ID number handy

and contact XM at http://activate.xmradio.com. You can also activate

your service by calling 1-800-852-9696.

Note: You will need to keep your Roady2 on for at least one hour after activation and installation to

receive the full channel lineup.

Caution: Failure to properly

follow all installation instructions

may result in personal injury or damage

to your Roady2 or to your vehicle.

Warning: When using this product it is

always important to keep your eyes on the road and

your hands on the wheel. Not doing so could result

in injury to you or to others or in property damage.

Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.