Jump to the previous channel Press the Jump button to listen to the previous channel you selected. ! NotE! The Jump button only works within the active radio service. Gradient consists of 3 colors: IP! You can view both the current and the previous T channel at the same time. Refer to Split-screen display mode on page 27.
Using your Mirge Set your favorite channels You can assign up to 10 of your favorite channels in each satellite service to the number buttons so you can quickly access them. To assign a favorite channel to a number button: 1 Tune to the desired channel. 2 Be sure you are in Favorite Channels mode. Press the Fav button until Favorite Channels shows as the tuning mode. 3 P ress and hold the Number button you want to use for that channel.
To listen to a Favorite channel: Favorite Channels tuning mode 1 Be sure you are in the Favorite Channels Favorite Channels tuning mode. Press the Fav button until Favorite Channels shows as the tuning mode. Gradient consists of 3 12:00 60 Carrie Underwood colors: Before He Cheats 2 P ress the Number button where you assigned theLight Blue: C100 M56 Y0 K0 desired channel.
Using your Mirge Automatically tune to a channel (Direct Tuning): Usually, you press the Select button to tune to a channel. You can change this so that your Mirge automatically tunes to a channel when it remains highlighted in the Channel List for longer than 3 seconds. To activate Direct Tuning: 1 Press the Menu button. 2 Highlight Channel Access, and press the Select button. 3 Highlight Direct Tune, and press the Select button. 4 Turn the knob until Direct Tune is ON. 5 Press the Select button.
To disable Direct Tuning: 1 Press the Menu button. 2 Highlight Channel Access, and press the Select button. 3 Highlight Direct Tune, and press the consists Select button. Gradient of 3 colors: 4 Turn the knob until Direct Tune is OFF. Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 Rich Black: C50 M40 Y40 K100 5 Press the Select button.
36
Special SpecialFeatures Features Gradientconsists consistsofof3 3colors: colors: Gradient LightBlue: Blue:C100 C100M56 M56Y0 Y0K0 K0 Light DarkBlue: Blue:C100 C100M38 M38Y0 Y0K64 K64 Dark RichBlack: Black:C50 C50M40 M40Y40 Y40K100 K100 Rich 37 37
Special Features 60-Minute Replay Buffer The Mirge’s 60-Minute Replay Buffer gives you the opportunity to “hear that again.” This feature applies to the current channel only. Changing channels or services, or turning your Mirge off removes all tracks from the Replay Buffer. Both split screen modes will display previously played tracks. In the Default Display mode you can turn the knob (radio) or use the Up/Down buttons (remote) to view the Replay List.
2 I f the current track has been playing for longer than 5 seconds, it is played from its beginning. If the current track has been playing for less than 5 seconds, the previous track is played. 3 Press the button to rewind the song. TIP! Press and hold the To listen to the next track: 1 Press the button for 3 seconds to skip to track. Gradient consists ofthe3first colors: Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 RichtoBlack: C50 button fast-forward theM40 song.
Special Features TuneSelect favorite artists and songs TuneSelect finds your favorite artist and song whenever they’re being played on any channel of the currently-tuned service. Mirge can track up to 20 of your favorite artists or songs. 1 When you hear a favorite artist or song, press and hold the Select button for 2 seconds. 2 To be notified when the song is played on any channel in the currently-tuned service, highlight TuneSelect Song.
To remove an artist or song from your TuneSelect list: 1 Edit Alerts Edit TuneSelect Press the Menu button. All Alerts 2 Highlight Edit Alerts, and press the Select button. Gradient (On) consists of 3 colors: 3 Highlight Edit TuneSelect, Light Blue:Edit C100 M56 Y0 K0 and press the Select Alerts>Edit TuneSelect button.
Special Features TIP! You can switch between Alert On Artist and Alert On Song at the “Edit Alerts > Edit TuneSelect” sub menu: • To Alert On an artist name, select a song title and choose Alert On Artist. Press the Select button. • To Alert On a song title, select an artist name and choose Alert On Song. Press the Select button. TIP! You can also TuneSelect artists and songs while in the Replay mode. See page 38.
Get stock quotes You can track the price and daily movement for up to 20 of your favorite stock symbols. ! NOTE! Information about most stocks and indices listed on the NYSE, AMEX, or NASDAQ is available. Market information is delayed approximately 25 minutes. Stock data provided by ComStock, Inc. 1 2 Gradient consists of 3 colors: Press the Menu button.Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 Highlight Info Extras, and press the Select button.
Special Features IP! Your Mirge will help you T complete the symbols for more than 9,000 regularly-traded stocks. 6 When you’re finished, press the < or Menu button. Info Extras>Stocks>AddStocks Rotate Knob for Stock Symbol Stock To remove a stock: 1 Press the Menu button. 2 Highlight Info Extras, and press the Select button. 3 Highlight Stocks, and press the Select button. 4 Highlight Erase Stocks, and press the Select button.
Get sports scores You can select up to 50 of your favorite sports and teams; you can view their scores and stats at any time. 1 Press the Menu button. 2 Select Info Extras, and press the Select button. 3 Select Sports, and press the Select button. 4 Select a favorite sport, and press the C100 Select button.
To remove a sport or team from your list: 46 1 Press the Menu button. 2 Select Info Extras, and press the Select button. 3 Select Sports, and press the Select button. 4 Select the sport (or team’s sport) to be removed and press the Select button. 5 If applicable, select the team to be removed, and press the Select button.
To see your stock quotes or sports scores: 1 Press the Menu button. 2 Highlight Change Display, and press the Select button. 3 Highlight Display Appearance , and press the Select Gradient consists of button. 3 colors: 4 Highlight Display, and press the Select button. Light Blue: C100 M56 Y0 K0 5 Rotate the knob until “Stock” or “Sports” appears, and press the Dark Blue: C100 M38 Y0 K64 Select button. The stock ticker will scroll across the screen.
Special Features Locking and unlocking channels The Mirge lets you lock channels you do not want others (such as children) to access without your permission. Locked channels will not appear on the Channel List screen, the Category List screen or on the Previous Channel screen. When anyone tries to access a locked channel using Direct Channel Entry (see page 30), the screen will display a Channel Locked popup for 3 seconds and the Mirge will return to the currently-tuned channel.
5 T he SIRIUS Channels / XM Channel Access > Channel Lock/Unlock Channels / All Explicit Channels (Lock) screen SIRIUS Channels appears. Highlight and XM Channels select SIRIUS Channels or XM Channels to lock/ All Explicit Channels (Lock) Gradient consists of 3 colors: unlock individual channels on the two services.
Special Features 8 A ll Explicit Channels: This option locks (or unlocks) all channels that SIRIUS XM Radio advises contain explicit language and/or graphic content. (Explicit SIRIUS channels can be found at www.sirius.com/mature; explicit XM channels are marked with an xL in their channel names.) Turn the knob to display Lock, then press the Select button. To unlock the explicit channels, turn the knob to display Unlock, then press the Select button.
4 Use the Number buttons to enter your current 4-digit lock code, then press the Select button. The Enter New Code screen appears. Channel Access > Channel Lock/Unlock Enter New Code # __ __ __ Gradient consists of__3 colors: 5 Use the Number buttons to enter your new 4-digit code, then press the Select Light Blue: C100 M56 Y0 K0 button. You will be Channel Access > Channel Dark Blue: C100 M38Lock/Unlock Y0 K64 prompted to confirm the Rich Black: C50 M40 Y40 K100 new code.
52
Configuring your Mirge Gradient consists of of 3 colors: Gradient consists 3 colors: Light Blue: C100 M56 Y0Y0 K0K0 Light Blue: C100 M56 Dark Blue: C100 M38 Y0Y0 K64 Dark Blue: C100 M38 K64 Rich Black: C50 M40 Y40 K100 Rich Black: C50 M40 Y40 K100 53
Configuring your Mirge Turning the FM modulator on/off (For use with XM SureConnect or XM FM Direct adapter.) If you are using the XM SureConnect or XM FM Direct Adapter to transmit audio to your car audio system, you must turn the FM Modulator on and set the FM frequency on both your Mirge and your car radio. 1 Press the Menu button. 2 Highlight Vehicle Mode, and press the Select button. The Vehicle Mode screen will appear.
TIP! The best FM frequency to use is displayed at the top of the list. We recommend choosing that frequency. If you are not satisfied with the sound quality, select a different FM frequency from the list (or select View All Frequencies to see 100 frequencies), press the Select button, and tune your car stereo to that frequency. Finding an FM frequency Gradient consists of 3 colors: If necessary, you can have your Mirge search for FM frequencies at any time.
Configuring your Mirge 4 Your Mirge automatically scans for and shows you a list of available FM frequencies. 5 U se the knob (radio) or Up/Down buttons (remote) to locate a suitable FM frequency from the list and press the Select button. Recommended FM Frequencies 88.1 Current Frequency 99.5 103.9 96.9 >View All FM Frequencies 6 Set your car radio to the frequency you selected.
Setting the Line Out level To connect the Mirge Vehicle Dock’s Audio Out jack directly to your car’s audio system to transmit audio, you can: • Use the included cassette adapter • Use your car stereo’s audio input (labeled “Aux In”, or similar) Gradient consists of 3 colors: Either of these methods will give you the best audio quality. When using either of these methods you can adjust the Mirge’s audio level to match the Light C100 M56 Y0 K0 level of the other sources in your car audioBlue: system.
Configuring your Mirge NOTE! Do not use the Line Out Level function as a volume control; use your car stereo’s volume control instead. Line Out Level is used to adjust the volume level to match other audio sources (your CD player, other FM stations, or an MP3 player). ! TIP! If using your Mirge in a home stand (sold separately) or sound system (sold separately), press the Menu button, then select Line Out Level.
Aiming the antenna for best reception For best reception, your Mirge’s antenna should have a 360-degree unobstructed view of the sky. In large cities there are networks of ground repeaters to help increase the signal coverage. Your Mirge can help you aim the antenna for best reception. Gradient consists 1 2 of 3 colors: Press the Menu button. Signal Indicator Light Blue: C100 M56 Y0 K0 Highlight Signal Indicator , Dark Blue: C100 M38 Y0 K64 Sat and press the Select button.
Configuring your Mirge Display Settings To change the display’s brightness and backlight timer: 1 Press the Menu Button. 2 Highlight Change Display, and press the Select button. 3 Highlight Display Setting, and press the Select button. 4 You can change: • B rightness: Highlight Brightness and press the Select button. Turn the knob to adjust the brightness. Press the Select button when you’re finished. • B acklight: Highlight Backlight and press the Select button.
Display appearance At times, cold weather can negatively affect the visual quality of scrolling text. By default, Stock information scrolls and Sport information pages. ! NOTE! Stock and sports information will be displayed as long as one either the SIRIUS or XM service is activated. Gradient consists of 3 colors: 1 Press the Menu button. Light C100 M56 2 Highlight Change Display, and pressBlue: the Select button.
Configuring your Mirge Setting the time The actual time is provided by the satellite signal. You can set the time zone where you reside, whether your area observes Daylight Savings Time, and the clock’s format. To set your time zone: 1 Press the Menu button. 2 Highlight Set Time and press the Select button. 3 Highlight Set Clock and press the Select button. 4 Highlight Time Zone and press the Select button. 5 Turn the knob to highlight your time zone and press the Select button.
5 Turn the knob to highlight Auto if your area observes Daylight Savings Time, or to highlight Off if your area does not observe Daylight Savings Time. 6 Press the Select button. To change the format of the time: 1 Press the Menu button. Gradient consists of 3 colors: 2 Highlight Set Time and pressLight the Select button. Blue: C100 3 M56 Y0 K0 Dark C100 M38 Y0 K64 Highlight Set Clock and press the SBlue: elect button. Rich Black: C50 M40 Y40 K100 4 Highlight Hour Mode and press the Select button.
Configuring your Mirge Automatic power Usually, your Mirge turns on automatically when it is plugged-in and receiving power. You can change this so you must manually turn the radio on/off each time. 1 Press the Menu button. 2 Highlight Set Time and press the Select button. 3 Highlight Automatic Power and press the Select button. 4 T urn the knob to highlight On to have your radio turn on automatically when it is plugged in, or to highlight Off to turn your radio on manually after it is plugged in.
Delayed power This option is useful if you leave your Mirge in the Vehicle Dock and your vehicle’s cigarette lighter is always powered. 1 Press the Menu button. of 3 colors: 2 H ighlight Set Time and pressGradient consists SetTime the Select button. The Set Time screen appears. Light Blue: C100 M56 Y0 K0 Set Clock 3 H ighlight Delayed Power and Dark Blue: C100 Y0 K64 Automatic Power M38 (On) press the Select button.
Configuring your Mirge Sleep timer Your Mirge has a sleep timer that can automatically shut off the unit after a period of time. The sleep timer is set to OFF at the factory, but you can set it for 15, 30, 45, or 60 minutes. NOTE! The Sleep Timer is available only when you’re using the Mirge with the home stand and sound systems (sold separately). 1 Press the Menu button. 2 Highlight Set Time, and press the Select button. 3 H ighlight Sleep Timer, and press the Select button.
Factory defaults You can clear all of your personal settings (such as Favorite Channels, Tune Select and Stock information) and return the radio to its out-of-the-box state. 1 Press the Menu button. Gradient consists of 3 colors: 2 Highlight Factory Defaults, and press the Select button. 3 Turn the knob to highlight Y es to clear yourC100 personal settings, to Light Blue: M56 Y0 or K0 highlight No to keep your personal settings. Dark Blue: C100 M38 Y0 K64 4 Press the Select button.
Configuring your Mirge Demo mode Your Mirge will automatically play a sales demo when your SIRIUS XM Radio subscription has not been activated and the Mirge is not connected to an antenna. Once your subscription has been activated the sales demo will not automatically appear. If desired, you can activate the demo after your subscription has been activated. 1 Make sure your Mirge is not connected to an antenna. 2 Press the Menu button. 3 Highlight Factory Defaults, and press the Select button.
Troubleshooting Gradient consists of 3 colors: Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 Rich Black: C50 M40 Y40 K100 69
Troubleshooting The Mirge has been designed and built to be trouble-free but if you experience a problem, try this: • Check that all connections are firm and secure. • M ake sure the vehicle’s cigarette lighter/auxiliary power socket is clean and free of corrosion. • I f you are using Mirge in a vehicle, check the car power adapter fuse by unscrewing the ribbed end of the adapter. If required, replace the fuse with a 2-amp fuse only.
If you see this on the screen: Try this Channel Off Air (XM only) The XM channel you’ve selected is not currently broadcasting. Tune to another channel. Loading Your Mirge is acquiring audio or program information from the satellite signal. This message usually goes away in a few seconds. SIRIUS Updating (SIRIUS only) SIRIUS XM is updating your Mirge with the latest SIRIUS firmware. Wait until the update is done.
Troubleshooting If this happens: Try this No audio Check all cables between the Mirge and your audio system for a firm and secure connection. No song title or artist name is The information may not be available, or updates may be in progress. displayed No audio when listening via an FM radio Check that your Mirge and your car radio are tuned to the same FM frequency. See Finding an FM frequency, on page 55. Audio fades or has static when listening Check all cables for a firm and secure connection.
Product Specifications Gradient consists of 3 colors: Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 Rich Black: C50 M40 Y40 K100 73
Product Specifications Dimensions Mirge Remote Weight Mirge Remote Audio Outputs External Power Voltage Current Polarity Remote Battery Type Voltage Model Number Mirge 74 115 mm (W) X 63 mm (H) X 20 mm (D) 4.5 in (W) X 2.5 in (H) X 0.78 in (D) 40 mm (W) X 119 mm (H) X 15.4 mm (D) 1.5 in (W) X 4.7 in (H) X 0.6 in (D) 133 g (4.7 oz) 60 g (2.1 oz) 3.
Patent & Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in receivers compatible with the SIRIUS XM Satellite Radio system.
Patent & Environmental Information SIRIUS XM Radio reserves all rights to all radio software not covered under the eCos license. This includes all portions of radio software that were not distributed to SIRIUS as part of the eCos operating system. Environmental Information Follow local guidelines for waste disposal when discarding packaging and electronic appliances. Your Satellite Radio receiver is packaged with cardboard, polyethylene, etc., and does not contain any unnecessary materials.
Copyrights and Trademarks ©2008 SIRIUS XM Radio Inc. “SIRIUS”, “The Best Radio on Radio”, the SIRIUS logos, channel names and logos and related marks are trademarks of SIRIUS XM Radio Inc. The “XM” name and related logo are trademarks of XM Satellite Radio Inc. All other trademarks, service marks, and logos are the property of their respective owners. Hardware and required monthly subscription sold separately. Our satellite radio service is not available in Alaska, Hawaii, or Canada.
FCC Statement The user is cautioned that changes or modifications not expressly approved by SIRIUS XM Satellite Radio Inc. can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Owner’s Record The model number is located below and the serial number is located on the label on the back of the Mirge. Record the serial number in the space provided below. Refer to these numbers whenever you call your dealer regarding this product. Gradient consists of 3 colors: Model No.: SXMIR1 Light Blue: C100 M56 Y0 K0 Dark Blue: C100 M38 Y0 K64 Rich Black: C50 M40 Y40 K100 Serial No.
SIRIUS XM Radio 1221 Avenue of the Americas New York, NY 10020 800.869.
