User's Manual

Onyx EZR User Guide

You can follow either the general activation and subscription process or use the on-board activation

guide to activate your Onyx EZR and subscribe to the XM service.

General activation and subscription process:

Subscribe to the XM service by following these steps:

1. Make sure your Onyx EZR is turned on, tuned to XM Preview channel 1, and receiving the XM

signal so that you can hear the XM audio.

2. Make a note of the XM Radio ID. You can find it:

•by selecting Radio ID in menu items

•on channel 0 (zero)

•on a label on the bottom of the gift box

•on the label on the back of your Onyx Plus

NOTE! The XM Radio ID does not use the letters I, O, S, or F.

3. To subscribe:

•Online: Go to www.siriusxm.com/activatenow to access or set up an online account, subscribe

to the service, and activate your Radio.

•By phone: Call 1-866-635-2349.

Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may

take up to an hour. We recommend that your Radio remain on until subscribed. Once subscribed, the

Radio will receive and you can tune to channels in your subscription plan.

Press up or down to tune to other channels, and left or right to browse the different

categories of channels. Learn what all the buttons do by turning to “Navigation Basics” on page

26.

Activation guide:

For your convenience, Onyx EZR has an on-board activation guide. You can activate your radio and

subscribe to the XM service by using this guide, where you will be guided step-by-step through the

subscription process. To access and use the guide, simply follow these steps:

1. Turn Onyx EZR on and press the Menu button.

2. Activate Radio will be highlighted. Press the Select button.

3. Follow the directions on each successive screen until you complete the

subscription process.

*The phone number show above may

differ from the one shown on your

Onyx EZR. All numbers are valid.

866-635-2349

siriusxm.com

XM Preview

Activate Radio

Radio ID

FM Settings

Jump Settings

Display Settings

Feature Settings

Activation