User's Manual

ManualsBrandsSirius XM Radio ManualsElectronicsOnyx EZR

Onyx EZR User Guide

103.7

Set your vehicle radio to

the above channel to

enable audio

Using Your Onyx EZR

FM Presets

FM presets make it easy to quickly access stored FM channels and choose a new FM channel from the

saved presets.

FM presets are used when you use PowerConnect or the FMDA to listen to your Onyx EZR

through

your vehicle’s FM radio. (Refer to “Option 3: PowerConnect Installation Instructions” on page 22

for more information.)

To use a different FM preset:

1. Press FM to display the current FM preset.

2. To display and select the next FM preset, press FM again. The Radio

will tune to the displayed FM channel. If the preset is the one you

want, press Menu or wait for the screen to time out.

3. Repeatedly pressing FM will cycle through the FM presets.

4. Set your vehicle’s FM radio to the same FM channel.

IMPORTANT! You need to ensure that your vehicle’s FM radio is tuned

to the same FM channel.

TIP! To conﬁgure the list of preset FM channels, you need to ﬁnd

available FM channels in your area. Refer to ”Find Available FM Channels

in Your Area” on page 38. Next, refer to “Set and Select an FM

Channel” on page 39.

Display Screen Mode

The display screen on the Onyx EZR can be adjusted to display a black background with white text,

or a white background with black text.

To switch between display modes:

1. At the main display screen (when not in TuneMix), press and hold the Jump button until the

display screen changes mode. Repeat to toggle between the display screen modes.

The display mode can also be adjusted through the menu settings. Refer to “Display Settings” on

page 43.

32 The Bridge

Jim Croce

Operator (That’s Not the Way It Feels)

Lost Time In A Bottle

Black text on a white background