User's Manual

Onyx EZR User Guide

Conﬁguring Your Onyx EZR

to cancel.

5. If you want to cancel press Menu to return to Factory Settings. AUX Detect will remain enabled.

6. AUX Detect will show as disabled. Press and hold Menu to return to the main display screen.

To enable AUX Detect:

Do this when the Radio is transferred to the PowerConnect Vehicle Dock from an older model Vehicle

Dock.

1. Press Menu.

2. Press to scroll to and highlight Factory Settings and press the Select button.

3. AUX Detect will be highlighted and show as disabled. Press the Select button again to toggle

the setting to enabled.

4. Press and hold Menu to return to the main display screen.

Restore Defaults

You can clear all of your personal settings, such as favorite channels, FM presets, etc., and return the

Radio to its original out-of-the-box settings.

To reset Onyx EZR to factory defaults:

NOTE! Restoring defaults permanently removes all personal settings.

1. Press Menu.

2. Press to scroll to and highlight Factory Settings and press the

Select button.

3. Press to scroll to and highlight Restore Defaults and press the Select button.

4. An advisory screen will be displayed. If you are certain that you want to reset your Onyx EZR to

the default settings, press the Select button to confirm.

5. If you want to cancel, press Menu to return to Factory Settings.

Demo Mode

Your Onyx EZR has a demo mode that starts playing when, for a prolonged period of time (more

than 5 minutes), the Radio either detects it’s not connected to the antenna, or the antenna stops

receiving a signal. It disappears when the antenna is connected properly or when the Radio starts

receiving a signal. You can also exit demo mode at any time, by pressing and holding the Select

button for 10 seconds. If desired, you can also manually put Onyx EZR in demo mode.

The ability for Onyx EZR to enter demo mode is enabled by default. If you don’t want Onyx EZR to

ever enter the demo mode, you can disable the demo feature. You can enable it again at another

time if desired.

All settings will be erased

Press Select to confirm