User's Manual

50
Onyx EZR User Guide
If this happens: Try this:
Audio fades or has static when
listening
•Check all cables for a firm and secure connection.
•If you are using PowerConnect to listen via your vehicle’s FM
radio, and the problem persists, it most likely is interference from
another commercial or broadcast FM station. You will need to
find an unused or available FM channel in your area. Refer to
“Find Available FM Channels in Your Area” on page 38.
•If you are using PowerConnect, and you cannot solve the audio
problem, try connecting the audio using the Aux In Cable or a
Cassette Adapter. (Refer to page 20 and page 21.) If you
cannot use those solutions, consider using an FM Direct Adapter.
(Refer to page 23.)
No audio when using
PowerConnect or FMDA
•Check that your Onyx EZR and your vehicle’s FM radio are tuned
to the same FM channel.
•For PowerConnect, ensure you are using the PowerConnect
Vehicle Dock and PowerConnect Power Adapter.
•If you are using the Vehicle Dock that came with the Universal
Xpress Car Kit, ensure that the FM Transmitter in Onyx EZR is
turned On.
No song title or artist name is
displayed
•The information may not be available or updates may be in
progress.
Traffic and Weather channels
sound different from other
channels
•These channels use a different audio technology than other
channels so they often sound different from other channels.
The demo is playing •Your Magnetic Mount Antenna is not connected or you are
not receiving the signal. Check that the antenna is connected
properly and is not obstructed.
•Press and hold the Select button for 10 seconds to exit Demo
Mode.
•You can disable Demo Mode. Refer to “Demo Mode” on page
47.
Troubleshooting