User's Manual

52
Direct Tune
A channel can be tuned directly by entering
the channel number using the number
buttons.
1. To directly tune to a channel press b/#.
2. Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to
the channel.
Return to Main Display Screen
Pressing and holding menu/alerts in most instances will return you to the
main display screen. In some cases, you may need to follow the instructions
on the display screen.
Jump and Traffic/Weather
Pressing jump/twx ( ) will immediately tune to the previous channel to
which you had been listening.
Pressing and holding jump/twx will tune to the traffic/weather for your
city. If you had not previously set the city for your location, you will be
prompted to set your city.
If the traffic/weather broadcast of your selected city is not immediately
available, a message will be displayed at the bottom of the screen to
indicate that a traffic/weather report is pending. Once the traffic/weather
report is ready to be broadcast, the Radio will automatically tune to the
traffic/weather channel. Since a channel may broadcast the traffic and
Direct Tune
Enter channel #
6 2 _
Using Your Onyx Plus