User's Manual

56
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a
new FM channel from them.
Use FM presets when you use
PowerConnect or the FMDA to listen to
your Onyx Plus through your vehicle’s FM
radio. (Refer to “Option 3: PowerConnect
Installation Instructions” on page 41 for
more information.)
To use a different FM preset:
1. Press and hold Power/FM to display
the FM Channels list showing the
current FM preset.
2. Press or to highlight the FM
preset, or use the number keys to select
the corresponding FM preset, for
example, pressing 3 will select FM3.
Press Select. The Radio will tune to the
selected FM channel. If the preset is the
one you want, press menu or wait for
the confirmation screen to time out.
3. Set your vehicle’s FM radio to the same FM channel.
IMPORTANT! You need to ensure that your vehicle’s FM radio is tuned to the
same FM channel.
TIP! To configure the list of preset FM channels, you need to find available FM
channels in your area. Refer to”Find Available FM Channels in Your Area” on
page 86. Next, refer to “Set and Select an FM Channel” on page 88.
FM Channels
current
FM 1
FM 2
FM 3
FM 4
FM 5
97.9
99.3
103.7
_ _ _
_ _ _
103.7 FM
Set your vehicle radio to the
above channel to enable audio.
Special Features