User's Guide

FM Presets

FM presets make it easy to quickly access stored FM channels and choose a

new FM channel from them.

Use FM presets when you use PowerConnect or the FMDA to listen to your

Onyx Plus through your vehicle’s FM radio. (Refer to “Option 3:

PowerConnect Installation Instructions” on page 41 for more information.)

To use a different FM preset:

1. Press and hold Power/FM to display the FM Channels list showing the

current FM preset.

2. Press up

and down to highlight

the FM preset, or use the number keys

to select the corresponding FM preset,

for example, pressing 3 will select FM3.

Press Select. The Radio will tune to the

selected FM channel. If the preset is the

one you want, press menu or wait for

the confirmation screen to time out.

3. Set your vehicle’s FM radio to the

same FM channel.

IMPORTANT! You need to ensure that

your vehicle’s FM radio is tuned to the

same FM channel.

TIP! To conﬁgure the list of preset FM

channels, you need to ﬁnd available FM

channels in your area. Refer to”Find

Available FM Channels in Your Area” on

page 106. Next, refer to “Set and

Select an FM Channel” on page 108.

Special Features