User's Manual

My XM Time-shifting Memory Mode

6. You must turn off your Tao xm2go for the

scheduled recording to operate. When the session

starts, the display will show “Session 1 (or 2)

Recording.” If your Tao xm2go is already on when

the session is supposed to start, Tao xm2go skips

the session and does not interrupt your listening.

When the session starts, it writes over the oldest

stored programs first, ensuring that you’re always

listening to the freshest programming.

Important! You can only store a session if your Tao

xm2go is turned off and plugged into the home stand,

with the AC adaptor connected and receiving power.

You must connect the home antenna to receive the XM

signal.

TIP: If you set the alarm to turn on your Tao xm2go

before a session is scheduled to start, that session

could be cancelled if the Tao xm2go is on and not off

to begin the session.

7. To erase the stored content, choose the “Clear My

XM” option under the “My XM” menu. All

previously recorded content can no longer be

accessed.