User's Manual

39
If you see this on the display…
UPDATING
Cause: Your Tao xm2go is being updated with the latest
encryption code.
You may have tried to tune to a channel that you have
blocked or that you cannot receive with your
subscription package.
There is no power or your Tao xm2go shuts off quickly.
You do not receive all XM channels you have
subscribed to.
Audio sounds distorted when using the built-in FM
transmitter.
Audio is too soft when using the built-in FM transmitter.
No audio when using the home stand that is connected
to a stereo system.
You should…
Simply wait a few seconds until the update is done.
To receive that channel, contact XM Satellite Radio at
1.800.852.9696.
Insert your Tao xm2go into its home stand and plug the
AC adaptor into the wall to charge the battery. Your Tao
xm2go’s battery is low (see page 12).
Contact XM Satellite Radio. Your Tao xm2go may not be
activated (see page 14).
Reduce audio output level (see page 21).
Increase audio output level (see page 21).
Check to see if you have plugged the AC adaptor into
the home stand. The audio line output only works when
the AC adaptor is plugged in.
Continued on next page.