Owner's Manual

Adhesive Foot
/
Clean the surface with the
alcohol preparation pad and
let
it dry thoroughly.
Peel
off the adhesive liner.
Position, press, and hold the
Dash Mount in place for 30
seconds.
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of
2-4 hours before using the mount. The best adhesion occurs
after 24 hours.
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon.
Warming the
pad with a hair dryer for several minutes will help soften the
adhesive. Be careful not overheat the surface with the hair dryer or you may
damage
the surface or Dash Mount.
3
4
5
Knob
\
•
•