Owner's Manual

or controls. Secure
the
excess cable
with
wire ties (purchased
separately).
4. Bring
the
end of
the
cable
out
at
the
PowerConnect
Vehicle Dock
location. Leave yourself enough cable
so
you can easily connect
it
to
the
antenna connector of
the
dock.
5. Continue with
UStep
5: Connect
the
Magnetic Mount Antenna and
PowerConnect
Power
Adapter"
on
page 39.
Convertible:
1.
Bring the antenna cable from
the
antenna into
the
trunk
at
the
front
edge
of
the
trunk
lid. Keep any bends in
the
cable loose. Tape or
tie
the cable along the inside of
the
trunk
lid
to
the
trunk
lid hinge
strut.
2. Allow enough slack in
the
cable
so
the
trunk
lid can easily open and
close and keep
the
cable away from hinges, gears, etc.,
that
could
crimp
or
cut it. Route the cable along
the
trunk
wall and
into
the
cabin through a conduit
or
along
an
existing wiring harness.
3. Route
the
cable through the
main cabin area under
the
interior
trim,
towards
the
front
of
the
vehicle. Use a blunt
plastic
putty
knife or similar
blunt tool
to
lift
the
plastic
trim
just
enough
to
tuck
the cable
under underneath. Avoid side