Owner's Manual

a.
b.
c.
d.
e.
f.
This Quick Start Guide covers the most common type of wireless network connection. If your
wireless network requires manual configuration refer to the User Guide. Also refer to the
“Troubleshooting” section in the User Guide if you encounter any problems.
Turning the TUNE knob scrolls through menus and lists to highlight items, and pressing the TUNE
knob selects a highlighted item.
Connect to a Wireless Network
a.
Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on
the rear of the SiriusXM Sound Station. Press the Power button if the Sound Station does not
turn on automatically.
b.
The Network Wizard screen will be displayed,
with Wireless highlighted. Press the TUNE knob
to select.
c.
On the Wireless screen, Scan will be highlighted.
Press the TUNE knob to select.
d.
Wait while the Sound Station scans for wireless
networks and then select your wireless network
from the list. Turn the TUNE knob to highlight
your wireless network and then press the TUNE
knob to select.
e.
The Sound Station will attempt to connect to
the wireless network. If you chose a network
that requires a password, you will be prompted
to enter the network password. Password will
be highlighted. Press the TUNE knob to begin
entering the password. Otherwise, the Sound
Station will attempt to connect to the wireless
network.
f.
To enter the network password, turn the
TUNE knob to highlight each character of the
password and press the TUNE knob to select
the character. Then enter the next character
and continue until you have finished entering
the password. If you make an error, press the
Delete button to erase the character. When
you have completed entering the network
password, press the Submit button.
g.
When the Sound Station has successfully
connected to the wireless network, “Connected
successfully” will be displayed. Continue with
step 2.
STEP 1: Connect to a Wireless Network
a.
b.
c.
d.
a.
b.
a.
a.
b.