Owner's Manual

Wi-Fi Sound Station User Guide

Manually Connecting to a Wireless Network

To manually connect to a wireless network, you’ll need to know the SSID (wireless network name), password,

and type of encryption, and also may need additional information about your wireless network if it is not

DHCP enabled:

SSID (wireless network name)

Password

Encryption (None, WEP, WPA-PSK)

If not DHCP:

IP Address (for the Wi-Fi Sound Station)

Mask (Network Mask IP Address)

Gateway (Gateway IP Address)

DNS (Primary Name Server IP Address)

1. Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on the rear

of the Wi-Fi Sound Station. Press the Power button if the Wi-Fi Sound Station does not automatically

turn on.

2. If the Sound System has not previously connected to a wireless network, the Wi-Fi Sound Station will

display the Network Wizard screen, with Wireless highlighted. Press the Tune Knob.

Otherwise, press the Home button and press the Settings button. Turn the Tune knob to highlight

Network Wizard and press Tune knob to select. Wireless will be highlighted; press Tune knob to select.

3. At the Wireless screen, Scan will be highlighted. Turn the Tune knob to highlight Manual and then press

the Tune knob.

4. SSID (wireless network name) will be highlighted. Press the Tune Knob.

Enter the SSID by turning the Tune knob to highlight each character of the

SSID and press the Tune knob to select the character. If you make an error,

press the BACK button to erase the entered character. When you have

completed entering the SSID, press the Submit button.

5. Turn the Tune knob and highlight Password. To enter the password, turn

the Tune knob to highlight each character of the password and press the

Tune knob to select the character. If you make an error, press the BACK

button to erase the entered character. When you have completed entering

the password, press the Submit button.

6. Turn the Tune knob and highlight Encryption. Turn the Tune Knob to highlight the type of encryption

and press the Tune Knob to select.

If DHCP is enabled on your wireless network, turn the Tune Knob and highlight DHCP Connect and press

the Tune Knob. Skip ahead to step 14.

If DHCP is not enabled on the wireless network, turn the Tune Knob and highlight Static IP and press

the Tune Knob.

8. IP will be highlighted. Press the Tune knob to select. Enter the IP Address. The IP address must be

entered in the xxx.xxx.xxx.xxx format. When you have completed entering the IP address, press the

Submit button.

9. Enter the Network Mask in the same way as you entered the IP Address.

10. Enter the Gateway IP Address in the same way.

11. Enter the DNS IP Address in the same way.

Installation