Manualshelf

Owner's Manual

ManualsBrandsSiriusXM ManualsAudioWi-Fi Sound Station Satellite Radio
31323334353637383940
34
Wi-Fi Sound Station User Guide
4. “Credentials Removed” will be briefly displayed.
Note that you will have to enter your SiriusXM streaming account username and password before you can
listen to SiriusXM.
Welcome Message
Welcome Message is used to check if the Wi-Fi Sound Station has internet connectivity.
1. Press the Home button and press the Settings button.
2. Turn the Tune knob and highlight Welcome Message and press the Tune knob to select.
3. If the Wi-Fi Sound Station has Internet connectivity, you should hear the SiriusXM welcome message.
Network Wizard
The Network Wizard allows you to connect to a wireless or wired network.
IMPORTANT! To connect to a network which restricts access by MAC address, the MAC address
of the Wi-Fi Sound Station must be added to the allowed list of MAC addresses in the access
point before connecting to the network. Refer to “Network Info” on page 35 for instructions
on finding the MAC address of the Wi-Fi Sound Station.
Network Wizard has two main options:
Wireless: This option is for connecting to a wireless network. Wireless has the following two options:
Scan: This option scans for wireless networks and displays a list. You can select a wireless network from
the list and quickly connect to it. Refer to “Step 1: Connect to a Wireless Network” on page 10.
Manual: This option allows you to enter all the wireless network configuration settings. Refer to
“Manually Connecting to a Wireless Network” on page 11.
Wired: This option is for connecting to a wired network. Note that you will need an optional Ethernet USB
adapter (sold separately). Wired has the following two options:
DHCP: This option is for networks which automatically supply an IP address and network information
(most networks).
Static IP: This option is for networks which use a static IP address. You will need to provide an IP
address and other network information.
Connect to a Wired Network using DHCP
1. Connect the Wi-Fi Sound Station to a wired network connection using the optional Ethernet USB
adapter (sold separately).
2. Press the Home button and press the Settings button.
3. Turn the Tune knob and highlight Network Wizard and press the Tune knob to select.
4. Turn the Tune knob and highlight Wired and press the Tune knob to select.
5. Turn the Tune knob and highlight DHCP and press the Tune knob to select.
6. The Wi-Fi Sound Station will attempt to connect to the network, and will display “Connected
Configuring the Wi-Fi Sound Station