User Manual

FM Audio FAQs
Q: I'm using FM for the audio connection with the SiriusXM Roady BT. How do I quickly change FM channels?
A: Press the Menu button, scroll down to Audio Settings and press the Select button. Scroll down to FM channels and
press the Select button. Then highlight and select one of the FM channels that you have saved. Be sure to set your
vehicle radio to the same FM channel.
Q: How do I preset FM channels?
A: Press the Menu button, scroll down to Audio Settings and press the Select button. Scroll down to FM channels and
press the Select button. Choose an empty FM preset denoted by "---" and use the Up/Down and Left/Right buttons to
set the FM channel. When you have selected the FM channel press the Select button to save it as an FM preset. You will
be prompted to set your vehicle radio to the same FM channel.
Troubleshooting FAQs
Q: What does it mean when the SiriusXM Roady BT display reads, "No Satellite Signal"?
A: It means the antenna is not receiving the satellite signal. Make sure the Magnetic Mount Antenna is mounted outside
of the vehicle with a clear view of the sky. If you are in an obstructed area (such as, a covered garage, tunnel etc.), you
should begin receiving the signal again after clearing the obstruction.
Q: What does it mean when the SiriusXM Roady BT display reads, "Check Antenna"?
A: It means the antenna may not be securely connected to the Intelligent Power Adapter. Make sure that the Magnetic
Mount Antenna cable is firmly and securely plugged into the Intelligent Power Adapter. If the message persists, most
likely the Magnetic Mount Antenna or the antenna cable has been damaged. You may need to replace the antenna.
Replacement antennas can be purchased online and at your favorite retailers.
Q: What does it mean when the SiriusXM Roady BT display reads, "Acquiring Signal"?
A: This message is perfectly normal. It simply means that the SiriusXM Roady BT is acquiring audio or program
information. This message usually goes away after a few seconds.
Q: What does it mean when the SiriusXM Roady BT display reads, "Channel XXX Unavailable"?
A: If your SiriusXM Roady BT is activated and you get this advisory when attempting to direct tune to a channel, it means
that the channel you've entered is not currently broadcasting. Tune to a channel that is currently broadcasting.
Q: What does it mean when the SiriusXM Roady BT display reads, "Channel XXX Not Subscribed"?
A: If your SiriusXM Roady BT is activated and you get this advisory when attempting to direct tune to a channel, it means
that the channel you've entered is not in the subscription package you selected. To find out more information about the
available subscription packages and channel lineups, visit
www.siriusxm.com/subscriptions.
Q: When using the Aux Cable to listen to the SiriusXM Roady BT, what does it mean when I do not hear audio?
A: You may not have the correct audio input source selected on your vehicle's headunit. Ensure you have selected the
Aux audio input source on your vehicle's headunit. Additionally, check all the cables and connections between the
SiriusXM Roady BT and your vehicle's headunit to ensure they're securely connected and undamaged.