Owner's Manual

The big decision.
Pick a spot for your radio. Air vent or dash mount?
A. Attach the mount
to vehicle dock.
Using the screws provided,
attach the vehicle dock
to the
vent mount.
B. Attach to vent.
If the vent louvers in your
vehicle are recessed, you may
need to use the longer vent
hooks with the vent mount.
Be sure to match the orientation
of the vent hooks as shown.
Position the two tension springs
against a heating /
AC vent
louver. Then gently push the
vent mount into the vent, far
enough
so that the hooks drop
down and hook the rear of the
vent louver. Once the hooks
have grasped a vent louver,
the tension springs will keep
the vent mount hooked to the
louver.
Use support foot to
brace the radio in place.
Refer
to page 18 in the User
Guide
if you prefer more
detailed
instructions.
AIR VENT
c!JA
Te s
Sp qs
\' L"'-
II ~)
/~ ..........
AdJustrr "t /v---
Ho s
Foot
To change the angle of
the vehicle dock, move
the
foot to a different
adjustment hole on the
vent mount.
BE SAFE:
Make sure
your radio
isn't in a place where
it could interfere
with driver visibility
or safe deployment
of the airbags.
BE SMART:
Additional vehicle in-
stallation accessories
are available
at your
satellite radio retailer
or visit sirius.com/
accessories/vehicle
installation for
more information.
Radio mount placement options for dash mount
Once you've selected a mounting location,
clean the mounting surface area in the
vehicle with the provided alcohol swab.
Allow the surface to dry for
2-3 minutes
and then
firmly mount the foot to the
dash location. The best adhesion occurs
after 24 hours. Refer to the User Guide
for more details.
DASH MOUNT