Owner's Manual

You'll be glad you did this right.
Place your magnetic antenna and hide those wires.
Here are some general
guidelines. For more
tips
and details, check out
your User Guide or go to
sirius.com/vehicleinstall/
A. Placing the antenna outside.
Leave at least 3" of metal around
the antenna.
Use the rubber tail
cover to hide and protect the
exposed wire.
Feed the wire under
the rubber molding around the
back windshield, into the
seal
around the trunk. Route the
cable along trunk wall and into
the interior cabin from there.
B. Hiding the antenna wire inside.
The best place to hide your
antenna wire depends
on your
vehicle. It's usually easiest to
run the wire from the rear of the
vehicle to the
front toward the
radio
by routing the cable along
the
interior trim where it meets
the carpet.
by gently pushing
it behind the edges of the trim.
Then bring the cable out from
trim and route under carpet to
dashboard
or console. Plug cable
into the radio and coil extra wire
under carpet or floor mat.
BE CAREFUL:
STOP and read
the more detailed
instructions - or get
a pro to help. If you
don't understand what
to do next. You might
accidentally do damage
to your ride.
BE SAFE:
Not properly placing
or installing the
antenna can create
safety hazards during
an accident.
BE SMART:
A
dry car is nice.
Avoid
damaging
or compromising
the window and
trunk seals.
BE SMART:
Use a
tool like a blunt
plastic putty knife to
help hide wires along
the trim.
Antenna placement options for other vehicles.
PICKUP TRUCK
Above
front windshield,
on
the roof toward front
of cab. Centered between
right and left sides.
CONVERTIBLE
On trunk lid, at least
3" from seam. Centered
between
right and left sides.