User guide

13
Vehicle Installation
correct, tighten the knob.
4. Attach the Dash Mount to the
PowerConnect Vehicle Dock using the
provided screws.
5. Clean the mounting surface in the vehicle
with the alcohol preparation pad and let
it dry thoroughly.
6. Peel off the adhesive liner. Position, press,
and hold the Dash Mount and PowerConnect
Vehicle Dock in place for 30 seconds.
IMPORTANT! Allow the Dash Mount adhesive to
cure (dry) for a minimum of 2-4 hours before
using the mount. The best adhesion occurs after
24 hours.
TIP! To remove the Dash Mount, carefully lift the adhesive pad with your
fingers or a spoon. Warming the pad with a hair dryer for several minutes will
help soften the adhesive.
Knob Adhesive Foot
Dock Mounting Plate