User guide

30
door opening.
3. Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard. Coil any
excess cable in a hidden location, such as under the carpet, keeping
it away from any vehicle pedals or controls. Secure the excess cable
with wire ties.
4. Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock.
5. Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 34.
Sport Utility Vehicle (SUV)
1. Feed the antenna cable underneath the rubber weather stripping
of the rear tailgate window/door and route the cable along the rear
hatch. Lift the weather stripping from the opening and tuck the cable
inside it, then replace the weather stripping. Pull the cable out from
weather stripping and route
it into the cabin under the
interior trim. Avoid hinges or
gears that could crimp or cut
the cable.
2. Route the cable through the
SUV’s main cabin area under
the interior trim, towards the
front of the vehicle. Use a
blunt plastic putty knife or
similar blunt tool to lift the
Vehicle Installation