Owner's Manual

6
Decide on one of the following in-box audio connection options. Refer to “Connect the Audio” on page 41 of the
User Guide for details including other connection options.
Option 1: Best: Use the provided Aux In Cable, if your vehicle’s stereo system has an auxiliary input jack.
A. Plug one end of the cable into the green
AUDIO connector on the PowerConnect
Vehicle Dock and the other end into the
auxiliary input jack on the vehicle’s stereo
system.
B. Turn on your vehicle’s stereo system and set
it to play from the auxiliary input source.
C. You should now hear channel 1, the XM Preview channel.
D. Attach the dock to the mount and place the wires into the wire guide. The
installation is complete.
TIP! Refer to your vehicle’s owner’s manual to find the location of the auxiliary input jack,
or consult the vehicle dealer.
Option 2: Good: Use the PowerConnect™ feature of Edge. PowerConnect plays the XM audio through your
vehicle’s FM radio.
A. Find and make a list of all available FM channels in your area that are not being used by an FM radio
station.
B. Pick the first FM channel on your list. Tune your vehicle’s FM radio to this FM
channel.
C. Set your Edge to transmit on the same FM channel that you have selected on your
vehicle’s FM radio:
i. Press menu and then turn the Rotary Knob to scroll to and highlight FM
Settings. Press the Select button.
ii.
FM Channels will be highlighted. If it is not, turn the Rotary Knob to scroll to
and highlight FM Channels. Press the Select button.
iii.
Turn the Rotary Knob to scroll to and highlight FM2. Press the Select button.
iv. Turn the Rotary Knob to tune in steps of .2, or press and to tune in steps
of 1 to select the available FM channel you have chosen. Press the Select
button to select the FM channel.
v. Start Using will be highlighted. P
ress the Select button.
vi. The selected FM channel will be confirmed on the display screen.
D. You should hear channel 1, the XM Preview channel through your vehicle’s FM radio. If you are satisfied with
the sound quality, the installation is complete.
E. If you are not satisfied, move to the next FM channel on your list and repeat the process. Continue until you
have found an FM channel with which you
are satisfied.
F. Attach the dock to the mount and place
the wires into the wire guide.
AUDIO ANT PWR FM
90.1
6
jump
fmmenu
7 8 9 0
#
1 2 3 4 5
MATCH FM CHANNELS
99.3 FM
Start Using
FM 2 _ _ _
Connect the Audio