Owner's Manual

o
o
Note that you will want to consider any potential
hazards when you choose the mounting location,
and possibly consider professional installation.
SIRIUS
XM Radio Inc. is not liable for any
damages.
To mount the antenna, you will need four screws
(sold separately) with a
1/4" head (e.g., an M3
screw), and that are suitable for the material
onto which you are affixing the antenna, (e.g.,
wood, metal, etc.).
The screws should be spaced
1-3/8" apart horizontally and H/8" vertically.
Refer
to the "Indoor/Outdoor Home Antenna
Template"
on page 38.
1-3/8 in
I t
r
e
-B1 e-B1
1-1/8 in
Le-B1
Once you have found a suitable location for the antenna, route the antenna cable
to the Portable Speaker Dock. Be sure you avoid any obstructions that could
crimp, kink,
or twist the cable. Use protective grommets wherever rough openings
are encountered. If the antenna is installed outdoors, route the cable from the
antenna location
to the interior of the home, working the cable through the
basement, under a window sill, etc., and make adjustments
to take up cable slack
as necessary.
•
TIP! If your Indoor/Outdoor Home Antenna's cable isn't long enough, visit sirius.
com/accessories,
or xmradio.com, and consider a 50 ft. Indoor/Outdoor Home
Antenna Extension Cable or a Wireless Home Signal Repeater.
If the signal is good for either Satellite or Terrestrial (or both), and you are hearing
the audio from the radio, the antenna installation is complete. (Refer to your radio's
User Guide for instructions
on how to access the Signal Indicator or Antenna Aiming