Owner's Manual

Option 1: Aux In Cable Installation Instructions

1. Plug one end of the Aux In Cable into the green AUDIO connector at

the side of the PowerConnect Vehicle Dock.

2. Plug the other end into the auxiliary input jack connection of your

vehicle’s stereo system.

3. If you are using the vent mounting method,

attach the Vent Mount to the vent.

4. Insert your Radio into the dock.

NOTE: Your Radio may be a different model than

the Radio shown here.

5. Be sure the vehicle is outside and the antenna

has a clear view of the sky.

6. Power on your Radio by pressing the Power button.

7. Be sure the vehicle is outside and the antenna has a clear view of the

sky. Verify that you are receiving the satellite signal. There should at

least be two bars on the main display screen that denotes antenna

signal strength. You can also refer to your Radio’s User Guide (go to

www.siriusxm.com/guides) for instructions on accessing the Signal

Indicator, Signal, or Antenna Aiming screen of your Radio, to see a

Vehicle Installation

AUDIO

ANT

34567890

b / #

alerts

twx

t-mix

t-scn

PL US