Owner's Manual

visual indication of signal strength. The

Satellite and Terrestrial bars show the

strength of the signal being received. If the

signal reception is good, exit the Antenna

Aiming or Signal Indicator screen and

continue with step 8.

8. Turn on your vehicle’s stereo system. Set

it to play input from the auxiliary input

source. You should hear the audio through

your vehicle’s stereo system. The aux in

cable installation is complete.

9. The audio level output of the Radio

can

be increased or decreased as necessary

to match the audio levels of other sources

in your vehicle. Refer to your Radio’s User

Guide (go to www.siriusxm.com/guides)

for instructions.

10.

If you are using the wire guide channel

across the back of the Vehicle Dock to

organize the wires, place the wires in the

guide and then tighten the 4 screws to

securely attach the mount. Then the installation is complete.

If the signal reception is good, showing at least two bars of antenna signal

strength, but there is no audio, be sure the vehicle’s stereo system is set

to the auxiliary input source (step 8). Also be sure that the audio level is

set high enough to be heard (step 9). Refer to “Troubleshooting” on page

46 for additional help.

Vehicle Installation

*The screens shown above are

representative and may differ

from the screens displayed on

your Radio.

Signal Indicator

ATELLIT

TERRESTRIA

Press menu to exit

866-635-2349

siriusxm.com