Owner's Manual

Indicator, Signal, or Antenna Aiming

screen of your Radio, to see a visual

indication of signal strength. The Satellite

and Terrestrial bars show the strength

of the signal being received. If the signal

reception is good, exit the Antenna Aiming

or Signal Indicator screen and continue

with step 8.

8. If you haven’t done so, turn on your

vehicle’s stereo system. Set it to play input

from the cassette source. You should hear

the audio through your vehicle’s stereo

system. The cassette adapter installation is

complete.

9. The audio level output of the Radio can

be increased or decreased as necessary

to match the audio levels of other sources

in your vehicle. Refer to your Radio’s User

Guide (go to www.siriusxm.com/guides)

for instructions.

10.

If you are using the wire guide channel

across the back of the Vehicle Dock to organize the wires, place the

wires in the guide and then tighten the 4 screws to securely attach the

mount. Then the installation is complete.

If the signal reception is good, showing at least two bars of antenna signal

strength, but there is no audio, be sure the vehicle’s stereo system is set to

the cassette source (step 8). Also be sure that the audio level is set high

enough to be heard (step 9). Refer to “Troubleshooting” on page 46 for

additional help.

Vehicle Installation

*The screens shown above are

representative and may differ

from the screens displayed on

your Radio.

Signal Indicator

ATELLIT

TERRESTRIA

Press menu to exit

866-635-2349

siriusxm.com