Owner's Manual

etc.) to locate channels that aren’t being used by a local FM radio station.

Write down each FM channel that has only static or silence on it, until you

reach 107.9.

5. Pick the first FM channel on your list from step 4. Turn on your vehicle’s

FM radio (if you have not already done so) and tune it to this FM channel.

You should only hear static or silence. If not, try the next FM channel on

your list,

6. Power on your Radio by pressing the Power button.

Be sure the vehicle is outside and the

antenna has a clear view of the sky. Verify

that you are receiving the satellite signal.

There should at least be two bars on the

main display screen that denotes antenna

signal strength. You can also refer to your

Radio’s User Guide (go to www.siriusxm.

com/guides) for instructions on accessing

the

Signal Indicator, Signal, or Antenna

Aiming

screen of your Radio, to see a visual

indication of signal strength. The Satellite

and Terrestrial bars show the strength of the

signal being received. If the signal reception

is good, exit the Antenna Aiming or Signal

Indicator screen and continue with step 8.

8. Set your satellite Radio to transmit on the

same FM channel that you have selected

in step 5. You may need to turn On the

FM Transmitter in your Radio first. Refer

to your Radio’s User Guide (go to www.

siriusxm.com/guides) for instructions.

Vehicle Installation

*The screens shown above are

representative and may differ

from the screens displayed on

your Radio.

Signal Indicator

ATELLIT

TERRESTRIA

Press menu to exit

866-635-2349

siriusxm.com