Owner's Manual

9. You should hear the SiriusXM audio through your vehicle’s FM radio. If you

are satisfied with the audio quality, continue with step 11.

. If the selected FM channel doesn’t work well for you, work down the

list of FM channels until you find one with which you are satisfied.

Each time, you will need to tune your vehicle’s FM radio to the FM

channel and then set your satellite Radio to transmit on the same FM

channel (steps 5 & 8).

TIP: You may ﬁnd an FM channel with static or silence on your vehicle’s FM

radio that does not work with your satellite Radio. It is possible that some

type of inaudible interference is present that prevents reception of the

SiriusXM broadcast. Your only options are to use another FM channel or a

different audio connection method.

11.

If you are using the wire guide channel across the back of the Vehicle

Dock to organize the wires, place the wires in the guide and then

tighten the 4 screws to securely attach the mount. The installation is

complete.

If the signal reception is good, showing at least two bars of signal strength,

but there is no audio, verify that both your satellite Radio and your vehicle’s

FM radio are tuned to the same FM channel (steps 5 & 8). Also ensure the

chosen FM channel is a suitable one to use in your area (step 4). Verify that

nothing is plugged into the green AUDIO connector on the PowerConnect

Vehicle Dock. Refer to “Troubleshooting” on page 46 for additional help.

Vehicle Installation

34567890

direct

jump

99.3

MATCH FM CHANNELS