Quick Start Guide

ManualsBrandsSiriusXM ManualsCar & Vehicle ElectronicsSiriusXM SXEZR1H1 Onyx EZR Satellite Radio with Home Kit - Get 3 Months Free Service with subscription

Connect the Home Dock and Dock the Radio

Select a location in close proximity to your stereo system or powered speakers, and also where

the cable from the Indoor/Outdoor Home Antenna can reach the Home Dock. The location

should be easily accessible and provide good visibility of the display, but should not be located

where it will be in direct sunlight, which will reduce the visibility of the display screen.

A. Connect the Indoor/Outdoor Home Antenna

to the silver ANT connector at the rear of the

Home Dock.

B. Connect the Home Power Adapter to the red

Power connector at the rear of the Home Dock,

and plug it into a wall outlet.

C. Place your Onyx EZR in the Home Dock.

D. Power on your Onyx EZR by pressing the Power button.

Start Here

Connect the Audio

The Home Dock can be connected to your stereo system, or to a set of powered speakers.

To Connect the Home Dock to Your Stereo System:

A. Take the provided Stereo Audio Cable and connect the single connector to the green

AUDIO connector at the rear of the Home Dock.

B. Connect the white left and red right Stereo Audio Cable connectors to any available input

other than PHONO on your stereo system. (If your stereo’s inputs are marked red and

black, connect the white plug to the black input.)

C. Turn the stereo system On,

and make sure you select

the correct input on your

stereo system for the AUX In

or LINE In connection.

D. If you have connected

everything correctly, and

you are receiving the XM

signal, you should hear the

XM audio from channel 1.

E. The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level”

in the User Guide to adjust the audio level. Go to www.siriusxm.com/guides for the Onyx

EZR User Guide (with Home Kit).

To Connect the Home Dock to Your Powered Speakers:

A. Connect the powered speakers to the

green AUDIO connector at the rear of

the Home Dock.

B. Plug the powered speakers into a wall

outlet.

C. Turn On the powered speakers.

D. If you have connected everything

correctly, and you are receiving the XM signal, you should hear the XM audio from channel 1.

E. The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level”

in the User Guide to adjust the audio level. Go to www.siriusxm.com/guides for the Onyx

EZR User Guide (with Home Kit).

Place & Aim the Indoor/Outdoor Home Antenna

A. Check the signal strength indicator on the Radio’s screen. If there are 2

or 3 bars of signal strength, continue with step 3. If not, continue with

step B below.

B. Access the Signal Indicator screen by pressing menu and then pressing

to scroll to and highlight Signal Indicator. Press the Select button.

C. Try experimenting with the Indoor/Outdoor Home Antenna to get a feel

for the reception in your location. If either the Satellite or the Terrestrial

signal bar (or both) are more than half ﬁlled, you are receiving a good

signal and are done aiming the antenna. Press and hold menu to exit the

Signal Indicator screen. The radio should be tuned to channel 1, the XM

Preview channel. Continue with step 3.

D. If you are not yet receiving a good signal, move the antenna around the

room or from room to room. Aim it at different windows, try moving the

antenna closer to a window, ideally one that is facing due south.

Not sure which way is south? Think about where the sun rises (in the east)

and sets (in the west). Then stand so that east is to your left and you’ll be

facing south. Is there a window in the direction you’re facing? Place the

antenna on the windowsill making sure it faces the glass and not the window

frame. If you are receiving a good Satellite or Terrestrial signal (or both),

you’re done aiming the antenna. Press and hold menu to exit the Signal

SOUTH

Indicator screen. The radio should be tuned to channel 1, the XM Preview

channel. Continue with step 3.

If you were unable to ﬁnd an indoor location for the antenna, you will need to place it outdoors. Refer

to “Step 2: Place and Aim the Indoor/Outdoor Home Antenna” in the User Guide for outdoor location

options. Go to www.siriusxm.com/guides for the Onyx EZR User Guide (with Home Kit).

You can either follow the general activation and subscription process or use the on-board activation guide to activate your Onyx EZR and subscribe to the XM service.

General activation and subscription process:

A. Make sure your Onyx EZR is turned on, receiving the XM signal, and tuned to XM channel 1 so that you can hear XM audio.

B. Make a note of your XM Radio ID. You can find it by selecting Radio ID in menu items, by tuning to channel 0, on a label on the bottom of the

gift box, and on the label on the back of your Onyx EZR.

NOTE! The XM Radio ID does not use the letters I, O, S, or F.

C. To subscribe:

•Online: Go to www.siriusxm.com/activatenow to access or set up an online account, subscribe to the service, and activate your Radio.

•By phone: Call 1-866-635-2349.

Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may take up to an hour. We recommend that your

Radio remain on until subscribed. Once subscribed, the Radio will receive and you can tune to channels in your subscription plan.

Press or to tune to other channels, and or to browse the different categories of channels. Learn what all the buttons do

on the opposite side of this Quick Start Guide.

Activation guide:

For your convenience, Onyx EZR has an on-board activation guide. You can activate your radio

and subscribe to the XM service by using this guide, where you will be guided step-by-step

through the subscription process. To access and use the guide, simply follow these steps:

A. Turn Onyx EZR on and press the menu button.

B. Activate Radio will be highlighted. Press the Select button.

C. Follow the directions on each successive screen until you complete the subscription

process.

*The phone number shown above

may differ from the one shown on

your Onyx EZR. All numbers are

valid.

AUDIOANT PWR

234567890

AUDIOANT PWR

866-635-2349

siriusxm.com

XM Preview

866-635-2349

siriusxm.com

XM Preview

Activate Radio

Radio ID

FM Settings

Jump Settings

Display Settings

Feature Settings

Signal Indicator

Press Menu to exit

Satellite

Terrestrial

Summary of content (2 pages)

PAGE 1
Start Here 1 Connect the Home Dock and Dock the Radio Select a location in close proximity to your stereo system or powered speakers, and also where the cable from the Indoor/Outdoor Home Antenna can reach the Home Dock. The location should be easily accessible and provide good visibility of the display, but should not be located where it will be in direct sunlight, which will reduce the visibility of the display screen. A.
PAGE 2
Onyx EZR Main Display Power Button Press to turn Radio on and off. When listening to a channel, information about the channel and what is currently playing is displayed. v2.0 Not Used Artist or Show Name Song/Program Title or Talk Show Host or Talk Show Schedule or Sports Teams/ or Game Time/Game Details Score Select Button At the main display screen press to display and dismiss the favorite channel preview pane; press to confirm selection of highlighted item in a menu or list.