Owner's Manual

Next, the antenna arm with the pod needs to be attached to the antenna base.
Refer to the illustration on page 16 and attach the antenna arm to the antenna
base:
1 Use a phillips screwdriver to remove the screw B from the antenna arm.
2 The mounting bracket C
on the antenna base has two sides. Before you
slide
the antenna arm over the mounting bracket C, be sure the antenna
arm and antenna base are
in the correct orientation as shown.
3
When correctly oriented, slide the antenna arm over the mounting bracket
C
on the antenna base and align the screw holes in the mounting bracket
with
the screw hole in the antenna arm.
4
When the screw hole is aligned, re-insert screw B and snug it until it is
tight.