Owner's Manual

Slide one of the U-bolts through the
holes
at the
top of the mounting bracket.
Then
slide
one of the mounting brackets over the two
legs
of the
U-bolt.
Next, screw the hex nuts
on
each
leg
until
they are snug.
Do
not yet tighten
the hex nuts beyond finger
tight.
Repeat
this
procedure with the
other
U-bolt.
When
all
the
hex
nuts are snug,
verify
that
the antenna is facing the correct
direction and begin tightening each hex
nut with a
3/8"
wrench. Turn each hex
nut one-half
turn
and
then move
to
the
next hex nut repeating this
one-half
turn
pattern
until
all the hex nuts are
equally
tight.
Tighten the
hex
nuts enough
so
that
the antenna is secured
to
the
mast
or
pole,
but
do
not overtighten them.