Owner's Manual

Safety and Care Information
IMPORTANT!
Always read and understand all
the
instructions
to
avoid injury
to
yourself and/or damage
to
your device. Sirius
XM
Radio
Inc.
disclaims all
responsibility
for
damage from data loss due
to
breakdown, repair, or other
causes.
•
Review this
installation manual before beginning the
installation process.
Installation
of the
antenna
and
splitter
requires experience in
mechanical
and
electrical
procedures,
and
may
involve
using a
ladder
to
reach the
soffit
or
roof of the home or
building.
A
phillips-type
screwdriver
and
a
3/8
in. wrench is needed for
installation,
and, depending upon the type of
installation, a power drill
with a
3/32
in.
drill
bit
may
also
be
required.
If
you are not
comfortable
or experienced with
the
installation
procedures,
SiriusXM recommends
that
you have a
professional install
the
kit
and
wiring
for
you.
•
Be
sure not
to
cut, damage, or puncture the external
jacket
of
the antenna
cables
during the
installation
procedure. Damage
to
the
antenna
cable
can
cause the SiriusXM signal to
be
degraded
or
unavailable,
and
can
also
cause water to intrude into the antenna
cable
causing the
cable
to fail.
•
Do
not expose
to
chemicals
such
as
benzene and thinners.
Do
not
use
liquid
or
aerosol cleaners. Clean
with a soft damp cloth only.
•
Do
not expose to fire, flame,
or other heat sources.
•
Do
not
try
to
disassemble and/or repair device
yourself.
•
Do
not drop your device or subject
it
to severe impact.
•
Do
not place heavy objects
on
device.
•
Do
not subject device to excessive pressure.