Instruction Manual

5. The audio level can be adjusted by swiping to the Sengs page, tap Audio Opons, then tap Audio Output Level
and adjust the audio output level.
Connecng the Audio Using the FMDA25 FM Direct Adapter
Certain models of motorcycles will require adapters to connect the AM/FM antenna to the FMDA25 and to connect
the FMDA25 to the motorcycle’s radio. These adapters are sold separately at auto parts stores or by professional
installers.
1. Remove the motorcycle’s radio from the dash and disconnect the AM/FM antenna cable from the rear of
the motorcycle’s radio.
2. Plug the FM Antenna Connector (A) from the FMDA25 into the same connector on the vehicle’s radio.
(Addional antenna adapter may be required.)
3. Plug the motorcycle’s AM/FM antenna cable into the female FM Antenna Socket (B) of the FMDA25.
(Addional antenna adapter may be required.)
4. Plug the Mini Connector (C) of the FMDA25 into the FM connecon of the Tuner Module.
5. If needed reinstall the radio.
6. The FMDA25 should be secured in a hidden locaon on the bike.
7. Turn the vehicle’s radio on and tune it to FM channel 97.9.
8. Press the Power buon on the Commander Touch Display Controller. Aer the start up sequence, you
should hear SiriusXM Preview Channel 1 through your vehicle’s radio.
Satellite Radio Superstore | www.SatelliteRadioSuperstore.com | [phone] | [e-mail] | Page 10