Instruction Manual

9. The audio level can be adjusted by swiping to the Sengs page, tap Audio Opons, then tap Audio Output Level
and adjust the audio output level.
NOTE! The Audio Output Level adjusts both the AUX audio output level as well as the FMDA audio output
level. Use cauon when making the adjustments. For FM, it is recommended to adjust the level to MAX.
10. If channel 97.9 has stac or interference, other FM channels can be selected by swiping to the Sengs page,
tap FM and adjust the FM channel. Tap a + buon to save it as a preset. Set the vehicle’s radio to the same FM
channel.
The installaon is now complete you are ready to acvate the CommanderTouch.
Subscribe to SiriusXM Radio Programming
Follow these steps to subscribe your Commander Touch. Once you have successfully acvated the Commander
Touch, you will be able to tune to other channels.
1. Make sure your Commander Touch is turned on, receiving the SiriusXM signal, and tuned to Preview Channel 1
so that you can hear the SiriusXM audio.
2. Make a note of your Radio ID. You can nd it by swiping to Sengs and tapping About, by tuning to channel 0,
on a label on the boom of the gi box, and on the label on the back of the Commander Touch Tuner Module .
3. NOTE! The Radio ID does not use the leers I, O, S, or F .
4. To subscribe:
• Online: www.siriusxm.com/acvatenow to access or set up an online account, subscribe to the service,
and acvate your Commander Touch
• Phone: Call 1-866-587-4225 (If calling to acvate, be sure to menon “Never Miss A Beat”). Acvaon
usually takes 10 to 15 minutes aer you have completed the subscripon process, but may take up to an
hour. We recommend that your Commander Touch remain on unl subscribed. Once subscribed, the
Commander Touch will receive, and you can tune to, the channels in your subscripon plan.
Satellite Radio Superstore | www.SatelliteRadioSuperstore.com | [phone] | [e-mail] | Page 11