Instruction Manual

1) Selecng the Correct Antenna Adapter
Included in the kit are two FAKRA antenna adapters that are used to connect the FMDA25 to the Ride Command®
antenna system. For vehicles prior to 2020 use the blue colored adapter. For vehicles manufactured in 2020 and
newer use the cable with the black FAKRA connector.
Blue for vehicles prior to 2020
Black for 2020 vehicles and newer
Universal antenna adapter cable
2) Connecng Adapters to FMDA25
If your vehicle has an AM/FM antenna to you can sll use the antenna with the FMDA25. The FMDA25 allows the
AM/FM signal to pass-thru to the Ride Command® system (or other aermarket stereo system).
1. Connect the RCA-FKA adapter cable into the female socket on the TO VEHICLE FM ANTENNA port on the
FMDA25
2. Connect the PRC-FKA (or V2 RIDECO per step 1) to the TO VEHICLEL FM RADIO port on the FMDA25
RCA-FKA
Installaon without AM/FM Antenna
If there is no AM/FM antenna installed in the vehicle the RCA-FKA antenna adapter
is not needed and the port labeled TO VEHICLE FM ANTENNA should be le open.
PRC-FKA or V2 RIDEOCO
Satellite Radio Superstore | www.SatelliteRadioSuperstore.com | [phone] | [e-mail] | Page 4