Instruction Manual

3) Locate the RIDE COMMAND® AM/FM Antenna Port
Locate the AM / FM antenna connector in your UTV. The color and locaon may vary based on the year and model
of your vehicle. In our example it is the connect on the right of the connecon cluster shown below.
1
2
3
4) Connect the FMDA25 to the Vehicle AM/FM Antenna Port
Plug the connecon from the FMDA25 labeled
"TO VEHICLE FM RADIO" into the RideCommand®
Antenna port. Make sure the connector is pushed all
the way down and the FAKRA connectors snaps in.
If the vehicle has an AM/FM antenna connect the
aqua colored connector on the port labeled
“TO VEHICLEL FM RADIO”. Make sure the connector is
pushed all the way down and the FAKRA connectors snaps in.
Satellite Radio Superstore | www.SatelliteRadioSuperstore.com | [phone] | [e-mail] | Page 5