Owner's Manual

Home Installation

Step 3: Connect the Home Dock to a Stereo System

or Powered Speakers

The Home Dock can be connected to your stereo system, or to a set

of powered speakers. If you are connecting to a stereo system, see the

following section. If you are connecting to a set of powered speakers, see

“To Connect the Home Dock to Your Powered Speakers” on page 19.

To Connect the Home Dock to Your Stereo System

The Home Dock can be connected to your stereo system through the AUX

In or LINE In connection of your stereo system, using the provided Stereo

Audio Cable.

1. Take the provided Stereo Audio Cable and connect the single 1/8” (3.5

mm) connector to the green AUDIO connector at the rear of the Home

Dock.

2. Connect the white left and red right Stereo Audio Cable connectors (“L”

and “R” are also on each respective tip) to any available input other than

PHONO on your stereo system. (If your stereo’s inputs are marked red

and black, simply connect the white plug to the black input.)

ANTAUDIO POWER