Owner's Manual

19
Home Installation
1. Turn the stereo system On, and make sure you select the correct input
on your stereo system for the AUX In or LINE In connection.
2. If you have connected everything correctly, and you are receiving the
XM signal, you should hear the XM audio from channel 1.
3. The audio level of your Radio can also be adjusted, if necessary.
Refer to “Audio Level” on page 69 to adjust the audio level. The
installation is complete.
To Connect the Home Dock to Your Powered Speakers
The Home Dock can be connected directly to a set of powered speakers.
1. Connect the 1/8” (3.5 mm) connector from the powered speakers to
the green AUDIO connector at the rear of the Home Dock.
2. Plug the powered speakers into a wall outlet.
3. Turn On the powered speakers.
4. If you have connected everything correctly, and you are receiving the
XM signal, you should hear the XM audio from channel 1.
5. The audio level of your Radio can also be adjusted, if necessary.
Refer to “Audio Level” on page 69 to adjust the audio level. The
installation is complete.
ANTAUDIO POWER