Owner's Manual

Using Onyx Plus With a Vehicle Dock

preset currently being used (denoted by “current”), then the FM

channel tuning screen is displayed.

ii. If the chosen storage location has an FM preset that is not currently

being used, and you want to edit it, Edit Channel is highlighted.

Press the Select button. The FM channel tuning screen is displayed.

iii. If the chosen storage location has an FM preset that is not currently

being used, and you want to start using it, press

to highlight Start

Using and press the Select button. Skip to step 7.

5 Press left

or right to tune to the desired FM channel in steps of .2,

i.e., 99.3 to 99.5. Press down

or up

to tune to the desired channel in

steps of 1, i.e., 99.3 to 100.3. Press the

Select button to select the FM channel.

6 If you are editing the storage location

that has the “current” FM preset, skip

to step 7. Otherwise, Start Using will be

highlighted. Press the Select button.

NOTE! You can also set an FM preset

without having to start using it right

away. Just press menu/alerts and exit

the screen.

7 The chosen FM channel will be

confirmed on the display screen and

Onyx Plus

will tune to that FM channel.

8 Set your vehicle’s FM radio to same FM

channel.

IMPORTANT! You’ll ﬁrst need to ﬁnd a

suitable FM channel that is unused or

available in your area.