Owner's Manual

Installation
Docking the Radio
Place your Plug and Play Radio into the Portable Speaker Dock as follows:
1. Be sure the Portable Speaker Dock is powered off.
2. Align the Radio with the Radio Dock Adapter and connector.
= =
= o=
3. Once aligned, gently press the Radio down so that it slides down the
Radio Dock Adapter and onto the connector until it is fully seated in
the Portable Speaker Dock.
Connecting the Power Adapter
The Portable Speaker Dock can operate on either batteries (8 "D" cells)
or by using the AC Power Adapter. Connect the AC Power Adapter to the
DC Power connector at the rear of the Portable Speaker Dock. (Refer to
"Controls and Connectors" on page 8.) Connect the Power Cord to the
AC Power Adapter and plug it into an AC outlet.